diff options
Diffstat (limited to 'marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff')
| -rw-r--r-- | marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff index 6f444c9..a5f88de 100644 --- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff +++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff @@ -1,13 +1,13 @@ diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h -index 09db032..172088a 100644 +index 172088a..09db032 100644 --- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h +++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h @@ -508,7 +508,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ --//#define USE_CONTROLLER_FAN Disabled since we are using FAN1 pin for extruder fan. -+#define USE_CONTROLLER_FAN +-#define USE_CONTROLLER_FAN ++//#define USE_CONTROLLER_FAN Disabled since we are using FAN1 pin for extruder fan. #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -15,8 +15,8 @@ index 09db032..172088a 100644 * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ --#define E0_AUTO_FAN_PIN FAN1_PIN //Extruder fan on FAN1 pin -+#define E0_AUTO_FAN_PIN -1 +-#define E0_AUTO_FAN_PIN -1 ++#define E0_AUTO_FAN_PIN FAN1_PIN //Extruder fan on FAN1 pin #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 |