From bcffc7a8e502aedbb17bfe623d263a27bb382d46 Mon Sep 17 00:00:00 2001 From: Eddie Ehlin Date: Fri, 8 Oct 2021 10:05:43 +0200 Subject: Added BLTouch related config (WIP) --- marlinfw-skr-e3-mini-v2/config-2.0.9.1/Configuration.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'marlinfw-skr-e3-mini-v2/config-2.0.9.1/Configuration.h') diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.1/Configuration.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.1/Configuration.h index 4fc2492..53db153 100644 --- a/marlinfw-skr-e3-mini-v2/config-2.0.9.1/Configuration.h +++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.1/Configuration.h @@ -1058,7 +1058,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1150,11 +1150,11 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -43, -10, 0 } // Z-offset usually -2.58 // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 40 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1201,7 +1201,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1507,9 +1507,9 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING +//#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1574,7 +1574,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1708,7 +1708,7 @@ * - Allows Z homing only when XY positions are known and trusted. * - If stepper drivers sleep, XY homing may be required again before Z homing. */ -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing -- cgit v1.2.3