From 5a716f722a767e25962810d3f3ed4ee51dc419e4 Mon Sep 17 00:00:00 2001 From: Eddie Ehlin Date: Fri, 1 Apr 2022 19:22:14 +0200 Subject: Added diffs projecting the changes made for using manual probe with mesh bed leveling. --- .../Configuration.h.diff | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff (limited to 'marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff') diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff new file mode 100644 index 0000000..c856f09 --- /dev/null +++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff @@ -0,0 +1,52 @@ +diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h +index 96a82a9..44c9f11 100644 +--- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h ++++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h +@@ -1033,7 +1033,7 @@ + * The probe replaces the Z-MIN endstop and is used for Z homing. + * (Automatically enables USE_PROBE_FOR_Z_HOMING.) + */ +-//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN ++#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + + // Force the use of the probe for Z-axis homing + //#define USE_PROBE_FOR_Z_HOMING +@@ -1067,7 +1067,7 @@ + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +-#define PROBE_MANUALLY ++//#define PROBE_MANUALLY + + /** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. +@@ -1182,8 +1182,7 @@ + * | [-] | + * O-- FRONT --+ + */ +-//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } Only of interest with BLTouch +-#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } ++#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } + + // Most probes should stay away from the edges of the bed, but + // with NOZZLE_AS_PROBE this can be negative for a wider probing area. +@@ -1558,7 +1557,7 @@ + * these options to restore the prior leveling state or to always enable + * leveling immediately after G28. + */ +-#define RESTORE_LEVELING_AFTER_G28 ++//#define RESTORE_LEVELING_AFTER_G28 + //#define ENABLE_LEVELING_AFTER_G28 + + /** +@@ -1668,8 +1667,8 @@ + //=================================== Mesh ================================== + //=========================================================================== + +- #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed +- #define GRID_MAX_POINTS_X 4 // Don't use more than 7 points per axis, implementation limited. ++ #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed ++ #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS -- cgit v1.2.3