From 6e846e6de13a32d7d868f90b6d31770adf670476 Mon Sep 17 00:00:00 2001 From: Eddie Ehlin Date: Thu, 20 Jan 2022 21:31:42 +0100 Subject: Added extruder fan related configuration (using FAN1_PIN as extruder fan) --- marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'marlinfw-skr-e3-mini-v2') diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h index 172088a..09db032 100644 --- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h +++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h @@ -508,7 +508,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -#define USE_CONTROLLER_FAN +//#define USE_CONTROLLER_FAN Disabled since we are using FAN1 pin for extruder fan. #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -607,7 +607,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN //Extruder fan on FAN1 pin #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 -- cgit v1.2.3