From 00e16c5057315b19a9b5ba2f85fe6e29d41d4370 Mon Sep 17 00:00:00 2001 From: Eddie Ehlin Date: Sat, 1 Feb 2020 21:25:50 +0100 Subject: Merged example configuration for release 2.0.3 to existing (may redo the changes needed directly, to eliminate possible merge issues). --- marlinfw/config/Configuration.h | 66 ++++--- marlinfw/config/Configuration_adv.h | 376 +++++++++++++++++++++++++++++------- 2 files changed, 346 insertions(+), 96 deletions(-) (limited to 'marlinfw/config') diff --git a/marlinfw/config/Configuration.h b/marlinfw/config/Configuration.h index 63e37f5..76ce8c7 100644 --- a/marlinfw/config/Configuration.h +++ b/marlinfw/config/Configuration.h @@ -143,7 +143,7 @@ // @section extruder // This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] +// :[1, 2, 3, 4, 5, 6, 7, 8] #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. @@ -330,9 +330,9 @@ //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN #define AUTO_POWER_CHAMBER_FAN @@ -360,7 +360,8 @@ * -1 : thermocouple with AD595 * 0 : not used * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) + * 331 : (3.3V scaled thermistor 1 table for MEGA) + * 332 : (3.3V scaled thermistor 1 table for DUE) * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! @@ -378,7 +379,8 @@ * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" * 15 : 100k thermistor calibration for JGAurora A5 hotend * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x + * 20 : Pt100 with circuit in the Ultimainboard V2.x with 5v excitation (AVR) + * 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....) * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup @@ -411,7 +413,10 @@ #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 +#define TEMP_SENSOR_6 0 +#define TEMP_SENSOR_7 0 #define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -439,6 +444,8 @@ #define HEATER_3_MINTEMP 5 #define HEATER_4_MINTEMP 5 #define HEATER_5_MINTEMP 5 +#define HEATER_6_MINTEMP 5 +#define HEATER_7_MINTEMP 5 #define BED_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -450,6 +457,8 @@ #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 #define HEATER_5_MAXTEMP 275 +#define HEATER_6_MAXTEMP 275 +#define HEATER_7_MAXTEMP 275 #define BED_MAXTEMP 120 //=========================================================================== @@ -654,12 +663,13 @@ * * A4988 is assumed for unspecified drivers. * - * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, + * TB6560, TB6600, TMC2100, * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] + * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ //#define X_DRIVER_TYPE A4988 //#define Y_DRIVER_TYPE A4988 @@ -668,12 +678,15 @@ //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 +//#define Z4_DRIVER_TYPE A4988 //#define E0_DRIVER_TYPE A4988 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 //#define E5_DRIVER_TYPE A4988 +//#define E6_DRIVER_TYPE A4988 +//#define E7_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. @@ -929,7 +942,8 @@ */ #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -// Certain types of probes need to stay away from edges +// Most probes should stay away from the edges of the bed, but +// with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define MIN_PROBE_EDGE 10 // X and Y axis travel speed (mm/m) between probes @@ -1039,6 +1053,8 @@ #define INVERT_E3_DIR false #define INVERT_E4_DIR false #define INVERT_E5_DIR false +#define INVERT_E6_DIR false +#define INVERT_E7_DIR false // @section homing @@ -1083,7 +1099,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - //#define MIN_SOFTWARE_ENDSTOP_Z -- For figuring out Z-offset (re-enable when done). + #define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1425,11 +1441,6 @@ #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - // // G20/G21 Inch mode support // @@ -1520,9 +1531,10 @@ // Default number of triangles #define NOZZLE_CLEAN_TRIANGLES 3 - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } + // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } } + // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }} + #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } } + #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } } // Circular pattern radius #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 @@ -1943,10 +1955,11 @@ // FYSETC variant of the MINI12864 graphic controller with SD support // https://wiki.fysetc.com/Mini12864_Panel/ // -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight +//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default +//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) +//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight +//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight +//#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight. // // Factory display for Creality CR-10 @@ -1957,6 +1970,11 @@ // //#define CR10_STOCKDISPLAY +// +// Ender-2 OEM display, a variant of the MKS_MINI_12864 +// +//#define ENDER2_STOCKDISPLAY + // // ANET and Tronxy Graphical Controller // @@ -2025,9 +2043,11 @@ //============================================================================= // -// DGUS Touch Display with DWIN OS +// DGUS Touch Display with DWIN OS. (Choose one.) // -//#define DGUS_LCD +//#define DGUS_LCD_UI_ORIGIN +//#define DGUS_LCD_UI_FYSETC +//#define DGUS_LCD_UI_HIPRECY // // Touch-screen LCD for Malyan M200 printers diff --git a/marlinfw/config/Configuration_adv.h b/marlinfw/config/Configuration_adv.h index e36a525..98f2068 100644 --- a/marlinfw/config/Configuration_adv.h +++ b/marlinfw/config/Configuration_adv.h @@ -78,6 +78,18 @@ #define HOTEND5_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_6 == 1000 + #define HOTEND6_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND6_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND6_BETA 3950 // Beta value +#endif + +#if TEMP_SENSOR_7 == 1000 + #define HOTEND7_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define HOTEND7_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define HOTEND7_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_BED == 1000 #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -165,28 +177,28 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif #if ENABLED(PIDTEMP) @@ -368,7 +380,7 @@ * FAST_PWM_FAN_FREQUENCY [undefined by default] * Set this to your desired frequency. * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers + * i.e., F = 31.4kHz on 16MHz microcontrollers or F = 39.2kHz on 20MHz microcontrollers. * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. * @@ -479,7 +491,7 @@ //#define X_DUAL_ENDSTOPS #if ENABLED(X_DUAL_ENDSTOPS) #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #define X2_ENDSTOP_ADJUSTMENT 0 #endif #endif @@ -489,27 +501,28 @@ //#define Y_DUAL_ENDSTOPS #if ENABLED(Y_DUAL_ENDSTOPS) #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #define Y2_ENDSTOP_ADJUSTMENT 0 #endif #endif -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 +// +// For Z set the number of stepper drivers +// +#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many + +#if NUM_Z_STEPPER_DRIVERS > 1 + //#define Z_MULTI_ENDSTOPS + #if ENABLED(Z_MULTI_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z2_ENDSTOP_ADJUSTMENT 0 + #if NUM_Z_STEPPER_DRIVERS >= 3 + #define Z3_USE_ENDSTOP _YMAX_ + #define Z3_ENDSTOP_ADJUSTMENT 0 + #endif + #if NUM_Z_STEPPER_DRIVERS >= 4 + #define Z4_USE_ENDSTOP _ZMAX_ + #define Z4_ENDSTOP_ADJUSTMENT 0 + #endif #endif #endif @@ -806,7 +819,7 @@ // probing on a screwhead or hollow washer, probe near the edges. //#define CALIBRATION_MEASURE_AT_TOP_EDGES - // Define pin which is read during calibration + // Define the pin to read during calibration #ifndef CALIBRATION_PIN #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin @@ -1243,6 +1256,44 @@ #endif // HAS_GRAPHICAL_LCD +// +// Additional options for DGUS / DWIN displays +// +#if HAS_DGUS_LCD + #define DGUS_SERIAL_PORT 2 + #define DGUS_BAUDRATE 115200 + + #define DGUS_RX_BUFFER_SIZE 128 + #define DGUS_TX_BUFFER_SIZE 48 + //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) + + #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates + #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen + + #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) + #define DGUS_PRINT_FILENAME // Display the filename during printing + #define DGUS_PREHEAT_UI // Display a preheat screen during heatup + + #if ENABLED(DGUS_LCD_UI_FYSETC) + //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC + #else + #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY + #endif + + #define DGUS_FILAMENT_LOADUNLOAD + #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) + #define DGUS_FILAMENT_PURGE_LENGTH 10 + #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS + #endif + + #define DGUS_UI_WAITING // Show a "waiting" screen between some screens + #if ENABLED(DGUS_UI_WAITING) + #define DGUS_UI_WAITING_STATUS 10 + #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping + #endif + #endif +#endif // HAS_DGUS_LCD + // // Touch UI for the FTDI Embedded Video Engine (EVE) // @@ -1341,6 +1392,13 @@ //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan #endif +// +// ADC Button Debounce +// +#if HAS_ADC_BUTTONS + #define ADC_BUTTON_DEBOUNCE_DELAY 16 // (ms) Increase if buttons bounce or repeat too fast +#endif + // @section safety /** @@ -1438,7 +1496,8 @@ * Override MIN_PROBE_EDGE for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific - * sides of the bed. + * sides of the bed. With NOZZLE_AS_PROBE negative values are + * allowed, to permit probing outside the bed. * * If you are replacing the prior *_PROBE_BED_POSITION options, * LEFT and FRONT values in most cases will map directly over @@ -1483,18 +1542,57 @@ #endif +/** + * Thermal Probe Compensation + * Probe measurements are adjusted to compensate for temperature distortion. + * Use G76 to calibrate this feature. Use M871 to set values manually. + * For a more detailed explanation of the process see G76_M871.cpp. + */ +#if HAS_BED_PROBE && TEMP_SENSOR_PROBE && TEMP_SENSOR_BED + // Enable thermal first layer compensation using bed and probe temperatures + #define PROBE_TEMP_COMPENSATION + + // Add additional compensation depending on hotend temperature + // Note: this values cannot be calibrated and have to be set manually + #if ENABLED(PROBE_TEMP_COMPENSATION) + // Max temperature that can be reached by heated bed. + // This is required only for the calibration process. + #define PTC_MAX_BED_TEMP 110 + + // Park position to wait for probe cooldown + #define PTC_PARK_POS_X 0.0F + #define PTC_PARK_POS_Y 0.0F + #define PTC_PARK_POS_Z 100.0F + + // Probe position to probe and wait for probe to reach target temperature + #define PTC_PROBE_POS_X 90.0F + #define PTC_PROBE_POS_Y 100.0F + + // Enable additional compensation using hotend temperature + // Note: this values cannot be calibrated automatically but have to be set manually + //#define USE_TEMP_EXT_COMPENSATION + #endif +#endif + // @section extras +// +// G60/G61 Position Save and Return +// +//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes + // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment + //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min + #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle + //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) + #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. @@ -1691,6 +1789,9 @@ // Z raise distance for tool-change, as needed for some extruders #define TOOLCHANGE_ZRAISE 2 // (mm) //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change + #if ENABLED(TOOLCHANGE_NO_RETURN) + //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X" // G-code to run after tool-change is complete + #endif // Retract and prime filament on tool-change //#define TOOLCHANGE_FILAMENT_SWAP @@ -1754,6 +1855,7 @@ #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. @@ -1818,6 +1920,12 @@ #define Z3_MICROSTEPS 16 #endif + #if AXIS_DRIVER_TYPE_Z4(TMC26X) + #define Z4_MAX_CURRENT 1000 + #define Z4_SENSE_RESISTOR 91 + #define Z4_MICROSTEPS 16 + #endif + #if AXIS_DRIVER_TYPE_E0(TMC26X) #define E0_MAX_CURRENT 1000 #define E0_SENSE_RESISTOR 91 @@ -1854,6 +1962,18 @@ #define E5_MICROSTEPS 16 #endif + #if AXIS_DRIVER_TYPE_E6(TMC26X) + #define E6_MAX_CURRENT 1000 + #define E6_SENSE_RESISTOR 91 + #define E6_MICROSTEPS 16 + #endif + + #if AXIS_DRIVER_TYPE_E7(TMC26X) + #define E7_MAX_CURRENT 1000 + #define E7_SENSE_RESISTOR 91 + #define E7_MICROSTEPS 16 + #endif + #endif // TMC26X // @section tmc_smart @@ -1935,6 +2055,14 @@ #define Z3_CHAIN_POS -1 #endif + #if AXIS_IS_TMC(Z4) + #define Z4_CURRENT 800 + #define Z4_CURRENT_HOME Z4_CURRENT + #define Z4_MICROSTEPS 16 + #define Z4_RSENSE 0.11 + #define Z4_CHAIN_POS -1 + #endif + #if AXIS_IS_TMC(E0) #define E0_CURRENT 650 #define E0_MICROSTEPS 16 @@ -1977,6 +2105,20 @@ #define E5_CHAIN_POS -1 #endif + #if AXIS_IS_TMC(E6) + #define E6_CURRENT 800 + #define E6_MICROSTEPS 16 + #define E6_RSENSE 0.11 + #define E6_CHAIN_POS -1 + #endif + + #if AXIS_IS_TMC(E7) + #define E7_CURRENT 800 + #define E7_MICROSTEPS 16 + #define E7_RSENSE 0.11 + #define E7_CHAIN_POS -1 + #endif + /** * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. * The default pins can be found in your board's pins file. @@ -1994,6 +2136,8 @@ //#define E3_CS_PIN -1 //#define E4_CS_PIN -1 //#define E5_CS_PIN -1 + //#define E6_CS_PIN -1 + //#define E7_CS_PIN -1 /** * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). @@ -2024,12 +2168,15 @@ #define Y2_SLAVE_ADDRESS 0 #define Z2_SLAVE_ADDRESS 0 #define Z3_SLAVE_ADDRESS 0 + #define Z4_SLAVE_ADDRESS 0 #define E0_SLAVE_ADDRESS 0 #define E1_SLAVE_ADDRESS 0 #define E2_SLAVE_ADDRESS 0 #define E3_SLAVE_ADDRESS 0 #define E4_SLAVE_ADDRESS 0 #define E5_SLAVE_ADDRESS 0 + #define E6_SLAVE_ADDRESS 0 + #define E7_SLAVE_ADDRESS 0 /** * Software enable @@ -2099,12 +2246,15 @@ #define Z_HYBRID_THRESHOLD 3 #define Z2_HYBRID_THRESHOLD 3 #define Z3_HYBRID_THRESHOLD 3 + #define Z4_HYBRID_THRESHOLD 3 #define E0_HYBRID_THRESHOLD 30 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 #define E4_HYBRID_THRESHOLD 30 #define E5_HYBRID_THRESHOLD 30 + #define E6_HYBRID_THRESHOLD 30 + #define E7_HYBRID_THRESHOLD 30 /** * Use StallGuard2 to home / probe X, Y, Z. @@ -2176,12 +2326,12 @@ #endif // HAS_TRINAMIC -// @section L6470 +// @section L64XX /** - * L6470 Stepper Driver options + * L64XX Stepper Driver options * - * Arduino-L6470 library (0.7.0 or higher) is required for this stepper driver. + * Arduino-L6470 library (0.8.0 or higher) is required. * https://github.com/ameyer/Arduino-L6470 * * Requires the following to be defined in your pins_YOUR_BOARD file @@ -2189,114 +2339,160 @@ * L6470_CHAIN_MISO_PIN * L6470_CHAIN_MOSI_PIN * L6470_CHAIN_SS_PIN - * L6470_RESET_CHAIN_PIN (optional) + * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset */ -#if HAS_DRIVER(L6470) - //#define L6470_CHITCHAT // Display additional status info +#if HAS_L64XX - #if AXIS_DRIVER_TYPE_X(L6470) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current (VALID: 375 x (1 - 16) - 6A max - rounds down) - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - #define X_CHAIN_POS -1 // Position in SPI chain. (<=0 : Not in chain. 1 : Nearest MOSI) - #endif + //#define L6470_CHITCHAT // Display additional status info - #if AXIS_DRIVER_TYPE_X2(L6470) + #if AXIS_IS_L64XX(X) + #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 + #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current + // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down + // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down + #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) + // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down + // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down + // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current + #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 + #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI + #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest + #endif + + #if AXIS_IS_L64XX(X2) #define X2_MICROSTEPS 128 #define X2_OVERCURRENT 2000 #define X2_STALLCURRENT 1500 #define X2_MAX_VOLTAGE 127 #define X2_CHAIN_POS -1 + #define X2_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_Y(L6470) + #if AXIS_IS_L64XX(Y) #define Y_MICROSTEPS 128 #define Y_OVERCURRENT 2000 #define Y_STALLCURRENT 1500 #define Y_MAX_VOLTAGE 127 #define Y_CHAIN_POS -1 + #define Y_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_Y2(L6470) + #if AXIS_IS_L64XX(Y2) #define Y2_MICROSTEPS 128 #define Y2_OVERCURRENT 2000 #define Y2_STALLCURRENT 1500 #define Y2_MAX_VOLTAGE 127 #define Y2_CHAIN_POS -1 + #define Y2_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_Z(L6470) + #if AXIS_IS_L64XX(Z) #define Z_MICROSTEPS 128 #define Z_OVERCURRENT 2000 #define Z_STALLCURRENT 1500 #define Z_MAX_VOLTAGE 127 #define Z_CHAIN_POS -1 + #define Z_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_Z2(L6470) + #if AXIS_IS_L64XX(Z2) #define Z2_MICROSTEPS 128 #define Z2_OVERCURRENT 2000 #define Z2_STALLCURRENT 1500 #define Z2_MAX_VOLTAGE 127 #define Z2_CHAIN_POS -1 + #define Z2_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_Z3(L6470) + #if AXIS_IS_L64XX(Z3) #define Z3_MICROSTEPS 128 #define Z3_OVERCURRENT 2000 #define Z3_STALLCURRENT 1500 #define Z3_MAX_VOLTAGE 127 #define Z3_CHAIN_POS -1 + #define Z3_SLEW_RATE 1 + #endif + + #if AXIS_IS_L64XX(Z4) + #define Z4_MICROSTEPS 128 + #define Z4_OVERCURRENT 2000 + #define Z4_STALLCURRENT 1500 + #define Z4_MAX_VOLTAGE 127 + #define Z4_CHAIN_POS -1 + #define Z4_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_E0(L6470) + #if AXIS_IS_L64XX(E0) #define E0_MICROSTEPS 128 #define E0_OVERCURRENT 2000 #define E0_STALLCURRENT 1500 #define E0_MAX_VOLTAGE 127 #define E0_CHAIN_POS -1 + #define E0_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_E1(L6470) + #if AXIS_IS_L64XX(E1) #define E1_MICROSTEPS 128 #define E1_OVERCURRENT 2000 #define E1_STALLCURRENT 1500 #define E1_MAX_VOLTAGE 127 #define E1_CHAIN_POS -1 + #define E1_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_E2(L6470) + #if AXIS_IS_L64XX(E2) #define E2_MICROSTEPS 128 #define E2_OVERCURRENT 2000 #define E2_STALLCURRENT 1500 #define E2_MAX_VOLTAGE 127 #define E2_CHAIN_POS -1 + #define E2_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_E3(L6470) + #if AXIS_IS_L64XX(E3) #define E3_MICROSTEPS 128 #define E3_OVERCURRENT 2000 #define E3_STALLCURRENT 1500 #define E3_MAX_VOLTAGE 127 #define E3_CHAIN_POS -1 + #define E3_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_E4(L6470) + #if AXIS_IS_L64XX(E4) #define E4_MICROSTEPS 128 #define E4_OVERCURRENT 2000 #define E4_STALLCURRENT 1500 #define E4_MAX_VOLTAGE 127 #define E4_CHAIN_POS -1 + #define E4_SLEW_RATE 1 #endif - #if AXIS_DRIVER_TYPE_E5(L6470) + #if AXIS_IS_L64XX(E5) #define E5_MICROSTEPS 128 #define E5_OVERCURRENT 2000 #define E5_STALLCURRENT 1500 #define E5_MAX_VOLTAGE 127 #define E5_CHAIN_POS -1 + #define E5_SLEW_RATE 1 + #endif + + #if AXIS_IS_L64XX(E6) + #define E6_MICROSTEPS 128 + #define E6_OVERCURRENT 2000 + #define E6_STALLCURRENT 1500 + #define E6_MAX_VOLTAGE 127 + #define E6_CHAIN_POS -1 + #define E6_SLEW_RATE 1 + #endif + + #if AXIS_IS_L64XX(E7) + #define E7_MICROSTEPS 128 + #define E7_OVERCURRENT 2000 + #define E7_STALLCURRENT 1500 + #define E7_MAX_VOLTAGE 127 + #define E7_CHAIN_POS -1 + #define E7_SLEW_RATE 1 #endif /** @@ -2308,7 +2504,7 @@ * I not present or I0 or I1 - X, Y, Z or E0 * I2 - X2, Y2, Z2 or E1 * I3 - Z3 or E3 - * I4 - E4 + * I4 - Z4 or E4 * I5 - E5 * M916 - Increase drive level until get thermal warning * M917 - Find minimum current thresholds @@ -2322,7 +2518,15 @@ //#define L6470_STOP_ON_ERROR #endif -#endif // L6470 +#endif // HAS_L64XX + +// @section i2cbus + +// +// I2C Master ID for LPC176x LCD and Digital Current control +// Does not apply to other peripherals based on the Wire library. +// +//#define I2C_MASTER_ID 1 // Set a value from 0 to 2 /** * TWI/I2C BUS @@ -2352,10 +2556,10 @@ * echo:i2c-reply: from:99 bytes:5 data:hello */ -// @section i2cbus - //#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave +#if ENABLED(EXPERIMENTAL_I2CBUS) + #define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave +#endif // @section extras @@ -2384,6 +2588,20 @@ // Duration to hold the switch or keep CHDK_PIN high //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) + + /** + * PHOTO_PULSES_US may need adjustment depending on board and camera model. + * Pin must be running at 48.4kHz. + * Be sure to use a PHOTOGRAPH_PIN which can rise and fall quick enough. + * (e.g., MKS SBase temp sensor pin was too slow, so used P1.23 on J8.) + * + * Example pulse data for Nikon: https://bit.ly/2FKD0Aq + * IR Wiring: https://git.io/JvJf7 + */ + //#define PHOTO_PULSES_US { 2000, 27850, 400, 1580, 400, 3580, 400 } // (µs) Durations for each 48.4kHz oscillation + #ifdef PHOTO_PULSES_US + #define PHOTO_PULSE_DELAY_US 13 // (µs) Approximate duration of each HIGH and LOW pulse in the oscillation + #endif #endif /** @@ -2723,7 +2941,11 @@ #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - // Use M119 to find reasonable values after connecting your hardware: + //#define INVERT_JOY_X // Enable if X direction is reversed + //#define INVERT_JOY_Y // Enable if Y direction is reversed + //#define INVERT_JOY_Z // Enable if Z direction is reversed + + // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } @@ -2778,12 +3000,15 @@ /** * WiFi Support (Espressif ESP32 WiFi) */ -//#define WIFISUPPORT -#if ENABLED(WIFISUPPORT) +//#define WIFISUPPORT // Marlin embedded WiFi managenent +//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) + +#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) #define WIFI_SSID "Wifi SSID" #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver with auto-discovery - //#define OTASUPPORT // Support over-the-air firmware updates + //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) + //#define OTASUPPORT // Support over-the-air firmware updates + //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host #endif /** @@ -2855,9 +3080,14 @@ // @section develop -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ +// +// M100 Free Memory Watcher to debug memory usage +// +//#define M100_FREE_MEMORY_WATCHER + +// +// M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe +// //#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands -- cgit v1.2.3