From dfc2d26b5e06af895fbd8b075ca52a748c4ee87f Mon Sep 17 00:00:00 2001
From: Eddie Ehlin <eddiex@eddiex.se>
Date: Thu, 23 Jan 2020 19:02:27 +0100
Subject: Ready for first upload (for figuring out nozzle to probe offsets).

---
 marlinfw/config/Configuration.h     | 10 +++++-----
 marlinfw/config/Configuration_adv.h |  4 ++--
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'marlinfw')

diff --git a/marlinfw/config/Configuration.h b/marlinfw/config/Configuration.h
index 6d188f4..63e37f5 100644
--- a/marlinfw/config/Configuration.h
+++ b/marlinfw/config/Configuration.h
@@ -644,7 +644,7 @@
 #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
 
 /**
  * Stepper Drivers
@@ -846,7 +846,7 @@
  * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
-#define PROBE_MANUALLY
+//#define PROBE_MANUALLY
 //#define MANUAL_PROBE_START_Z 0.2
 
 /**
@@ -870,7 +870,7 @@
 /**
  * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  */
-//#define BLTOUCH
+#define BLTOUCH
 
 /**
  * Touch-MI Probe by hotends.fr
@@ -1083,7 +1083,7 @@
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
-  #define MIN_SOFTWARE_ENDSTOP_Z
+  //#define MIN_SOFTWARE_ENDSTOP_Z -- For figuring out Z-offset (re-enable when done).
 #endif
 
 // Max software endstops constrain movement within maximum coordinate bounds
@@ -1322,7 +1322,7 @@
 // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
 // - Prevent Z homing when the Z probe is outside bed area.
 //
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING
 
 #if ENABLED(Z_SAFE_HOMING)
   #define Z_SAFE_HOMING_X_POINT 150 // X point for Z homing when homing all axes (G28).
diff --git a/marlinfw/config/Configuration_adv.h b/marlinfw/config/Configuration_adv.h
index d230c14..e36a525 100644
--- a/marlinfw/config/Configuration_adv.h
+++ b/marlinfw/config/Configuration_adv.h
@@ -1387,10 +1387,10 @@
 
   //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
 
-  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
     //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
-    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
+    #define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
   #endif
 #endif
 
-- 
cgit v1.2.3