path: root/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff

diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h
index 09db032..172088a 100644
--- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h
+++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h
@@ -508,7 +508,7 @@
  * The fan turns on automatically whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
  */
-//#define USE_CONTROLLER_FAN Disabled since we are using FAN1 pin for extruder fan.
+#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
   //#define CONTROLLER_FAN_PIN -1           // Set a custom pin for the controller fan
   //#define CONTROLLER_FAN_USE_Z_ONLY       // With this option only the Z axis is considered
@@ -607,7 +607,7 @@
  * Multiple extruders can be assigned to the same pin in which case
  * the fan will turn on when any selected extruder is above the threshold.
  */
-#define E0_AUTO_FAN_PIN FAN1_PIN //Extruder fan on FAN1 pin
+#define E0_AUTO_FAN_PIN -1
 #define E1_AUTO_FAN_PIN -1
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1