Initial commit containing CR10S example configuration for 2.0.1 release.

author: Eddie Ehlin <eddiex@eddiex.se> 2020-01-23 18:34:59 +0100
committer: Eddie Ehlin <eddiex@eddiex.se> 2020-01-23 18:34:59 +0100
commit: 216d179bdbf9713c69acd49d5b39c370b0745e6a (patch)
tree: cf4bd4960514b98eb03b465a908bb75ce1fab12d /marlinfw/config/Configuration_adv.h
download: 3DPrinter-CR10S-216d179bdbf9713c69acd49d5b39c370b0745e6a.tar.gz
3DPrinter-CR10S-216d179bdbf9713c69acd49d5b39c370b0745e6a.zip
1 files changed, 2864 insertions, 0 deletions
diff --git a/marlinfw/config/Configuration_adv.h b/marlinfw/config/Configuration_adv.h
new file mode 100644
index 0000000..d230c14
--- /dev/null
+++ b/marlinfw/config/Configuration_adv.h
@@ -0,0 +1,2864 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Configuration_adv.h
+ *
+ * Advanced settings.
+ * Only change these if you know exactly what you're doing.
+ * Some of these settings can damage your printer if improperly set!
+ *
+ * Basic settings can be found in Configuration.h
+ *
+ */
+#define CONFIGURATION_ADV_H_VERSION 020000
+
+// @section temperature
+
+//===========================================================================
+//=============================Thermal Settings  ============================
+//===========================================================================
+
+//
+// Custom Thermistor 1000 parameters
+//
+#if TEMP_SENSOR_0 == 1000
+  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND0_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_1 == 1000
+  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND1_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_2 == 1000
+  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND2_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_3 == 1000
+  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND3_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_4 == 1000
+  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND4_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_5 == 1000
+  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define HOTEND5_BETA                 3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_BED == 1000
+  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
+  #define BED_BETA                     3950    // Beta value
+#endif
+
+#if TEMP_SENSOR_CHAMBER == 1000
+  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
+  #define CHAMBER_BETA                 3950    // Beta value
+#endif
+
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
+/**
+ * Heated Chamber settings
+ */
+#if TEMP_SENSOR_CHAMBER
+  #define CHAMBER_MINTEMP             5
+  #define CHAMBER_MAXTEMP            60
+  #define TEMP_CHAMBER_HYSTERESIS     1   // (°C) Temperature proximity considered "close enough" to the target
+  //#define CHAMBER_LIMIT_SWITCHING
+  //#define HEATER_CHAMBER_PIN       44   // Chamber heater on/off pin
+  //#define HEATER_CHAMBER_INVERTING false
+#endif
+
+#if DISABLED(PIDTEMPBED)
+  #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
+  #if ENABLED(BED_LIMIT_SWITCHING)
+    #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
+  #endif
+#endif
+
+/**
+ * Thermal Protection provides additional protection to your printer from damage
+ * and fire. Marlin always includes safe min and max temperature ranges which
+ * protect against a broken or disconnected thermistor wire.
+ *
+ * The issue: If a thermistor falls out, it will report the much lower
+ * temperature of the air in the room, and the the firmware will keep
+ * the heater on.
+ *
+ * The solution: Once the temperature reaches the target, start observing.
+ * If the temperature stays too far below the target (hysteresis) for too
+ * long (period), the firmware will halt the machine as a safety precaution.
+ *
+ * If you get false positives for "Thermal Runaway", increase
+ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
+ */
+#if ENABLED(THERMAL_PROTECTION_HOTENDS)
+  #define THERMAL_PROTECTION_PERIOD 40        // Seconds
+  #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
+
+  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
+    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+  #endif
+
+  /**
+   * Whenever an M104, M109, or M303 increases the target temperature, the
+   * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
+   * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
+   * requires a hard reset. This test restarts with any M104/M109/M303, but only
+   * if the current temperature is far enough below the target for a reliable
+   * test.
+   *
+   * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
+   * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
+   * below 2.
+   */
+  #define WATCH_TEMP_PERIOD 20                // Seconds
+  #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
+#endif
+
+/**
+ * Thermal Protection parameters for the bed are just as above for hotends.
+ */
+#if ENABLED(THERMAL_PROTECTION_BED)
+  #define THERMAL_PROTECTION_BED_PERIOD 20    // Seconds
+  #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
+
+  /**
+   * As described above, except for the bed (M140/M190/M303).
+   */
+  #define WATCH_BED_TEMP_PERIOD 60                // Seconds
+  #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
+#endif
+
+/**
+ * Thermal Protection parameters for the heated chamber.
+ */
+#if ENABLED(THERMAL_PROTECTION_CHAMBER)
+  #define THERMAL_PROTECTION_CHAMBER_PERIOD 20    // Seconds
+  #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
+
+  /**
+   * Heated chamber watch settings (M141/M191).
+   */
+  #define WATCH_CHAMBER_TEMP_PERIOD 60            // Seconds
+  #define WATCH_CHAMBER_TEMP_INCREASE 2           // Degrees Celsius
+#endif
+
+#if ENABLED(PIDTEMP)
+  // Add an experimental additional term to the heater power, proportional to the extrusion speed.
+  // A well-chosen Kc value should add just enough power to melt the increased material volume.
+  //#define PID_EXTRUSION_SCALING
+  #if ENABLED(PID_EXTRUSION_SCALING)
+    #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+    #define LPQ_MAX_LEN 50
+  #endif
+
+  /**
+   * Add an experimental additional term to the heater power, proportional to the fan speed.
+   * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan.
+   * You can either just add a constant compensation with the DEFAULT_Kf value
+   * or follow the instruction below to get speed-dependent compensation.
+   *
+   * Constant compensation (use only with fanspeeds of 0% and 100%)
+   * ---------------------------------------------------------------------
+   * A good starting point for the Kf-value comes from the calculation:
+   *   kf = (power_fan * eff_fan) / power_heater * 255
+   * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater.
+   *
+   * Example:
+   *   Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8
+   *   Kf = (2.4W * 0.8) / 40W * 255 = 12.24
+   *
+   * Fan-speed dependent compensation
+   * --------------------------------
+   * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%).
+   *    Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled.
+   *    If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature
+   *    drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big.
+   * 2. Note the Kf-value for fan-speed at 100%
+   * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving.
+   * 4. Repeat step 1. and 2. for this fan speed.
+   * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in
+   *    PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED
+   */
+  //#define PID_FAN_SCALING
+  #if ENABLED(PID_FAN_SCALING)
+    //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION
+    #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION)
+      // The alternative definition is used for an easier configuration.
+      // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED.
+      // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly.
+
+      #define PID_FAN_SCALING_AT_FULL_SPEED 13.0        //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf
+      #define PID_FAN_SCALING_AT_MIN_SPEED 6.0          //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf
+      #define PID_FAN_SCALING_MIN_SPEED 10.0            // Minimum fan speed at which to enable PID_FAN_SCALING
+
+      #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED)
+      #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
+
+    #else
+      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power loss due to cooling = Kf * (fan_speed)
+      #define DEFAULT_Kf 10                              // A constant value added to the PID-tuner
+      #define PID_FAN_SCALING_MIN_SPEED 10               // Minimum fan speed at which to enable PID_FAN_SCALING
+    #endif
+  #endif
+#endif
+
+/**
+ * Automatic Temperature:
+ * The hotend target temperature is calculated by all the buffered lines of gcode.
+ * The maximum buffered steps/sec of the extruder motor is called "se".
+ * Start autotemp mode with M109 S<mintemp> B<maxtemp> F<factor>
+ * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
+ * mintemp and maxtemp. Turn this off by executing M109 without F*
+ * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
+ * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
+ */
+#define AUTOTEMP
+#if ENABLED(AUTOTEMP)
+  #define AUTOTEMP_OLDWEIGHT 0.98
+#endif
+
+// Show extra position information with 'M114 D'
+#define M114_DETAIL
+
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
+//#define SHOW_TEMP_ADC_VALUES
+
+/**
+ * High Temperature Thermistor Support
+ *
+ * Thermistors able to support high temperature tend to have a hard time getting
+ * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
+ * will probably be caught when the heating element first turns on during the
+ * preheating process, which will trigger a min_temp_error as a safety measure
+ * and force stop everything.
+ * To circumvent this limitation, we allow for a preheat time (during which,
+ * min_temp_error won't be triggered) and add a min_temp buffer to handle
+ * aberrant readings.
+ *
+ * If you want to enable this feature for your hotend thermistor(s)
+ * uncomment and set values > 0 in the constants below
+ */
+
+// The number of consecutive low temperature errors that can occur
+// before a min_temp_error is triggered. (Shouldn't be more than 10.)
+//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+
+// The number of milliseconds a hotend will preheat before starting to check
+// the temperature. This value should NOT be set to the time it takes the
+// hot end to reach the target temperature, but the time it takes to reach
+// the minimum temperature your thermistor can read. The lower the better/safer.
+// This shouldn't need to be more than 30 seconds (30000)
+//#define MILLISECONDS_PREHEAT_TIME 0
+
+// @section extruder
+
+// Extruder runout prevention.
+// If the machine is idle and the temperature over MINTEMP
+// then extrude some filament every couple of SECONDS.
+//#define EXTRUDER_RUNOUT_PREVENT
+#if ENABLED(EXTRUDER_RUNOUT_PREVENT)
+  #define EXTRUDER_RUNOUT_MINTEMP 190
+  #define EXTRUDER_RUNOUT_SECONDS 30
+  #define EXTRUDER_RUNOUT_SPEED 1500  // (mm/m)
+  #define EXTRUDER_RUNOUT_EXTRUDE 5   // (mm)
+#endif
+
+// @section temperature
+
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
+
+/**
+ * Controller Fan
+ * To cool down the stepper drivers and MOSFETs.
+ *
+ * The fan will turn on automatically whenever any stepper is enabled
+ * and turn off after a set period after all steppers are turned off.
+ */
+//#define USE_CONTROLLER_FAN
+#if ENABLED(USE_CONTROLLER_FAN)
+  //#define CONTROLLER_FAN_PIN -1           // Set a custom pin for the controller fan
+  #define CONTROLLERFAN_SECS 60             // Duration in seconds for the fan to run after all motors are disabled
+  #define CONTROLLERFAN_SPEED 255           // 255 == full speed
+  //#define CONTROLLERFAN_SPEED_Z_ONLY 127  // Reduce noise on machines that keep Z enabled
+#endif
+
+// When first starting the main fan, run it at full speed for the
+// given number of milliseconds.  This gets the fan spinning reliably
+// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
+//#define FAN_KICKSTART_TIME 100
+
+// Some coolers may require a non-zero "off" state.
+//#define FAN_OFF_PWM  1
+
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
+//#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
+
+/**
+ * FAST PWM FAN Settings
+ *
+ * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
+ * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
+ * frequency as close as possible to the desired frequency.
+ *
+ * FAST_PWM_FAN_FREQUENCY [undefined by default]
+ *   Set this to your desired frequency.
+ *   If left undefined this defaults to F = F_CPU/(2*255*1)
+ *   ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
+ *   These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
+ *   NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior.
+ *
+ * USE_OCR2A_AS_TOP [undefined by default]
+ *   Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
+ *   16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
+ *   20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
+ *   A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
+ *   PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
+ *   USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
+ */
+#if ENABLED(FAST_PWM_FAN)
+  //#define FAST_PWM_FAN_FREQUENCY 31400
+  //#define USE_OCR2A_AS_TOP
+#endif
+
+// @section extruder
+
+/**
+ * Extruder cooling fans
+ *
+ * Extruder auto fans automatically turn on when their extruders'
+ * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
+ *
+ * Your board's pins file specifies the recommended pins. Override those here
+ * or set to -1 to disable completely.
+ *
+ * Multiple extruders can be assigned to the same pin in which case
+ * the fan will turn on when any selected extruder is above the threshold.
+ */
+#define E0_AUTO_FAN_PIN -1
+#define E1_AUTO_FAN_PIN -1
+#define E2_AUTO_FAN_PIN -1
+#define E3_AUTO_FAN_PIN -1
+#define E4_AUTO_FAN_PIN -1
+#define E5_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
+
+#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
+#define EXTRUDER_AUTO_FAN_SPEED 255   // 255 == full speed
+#define CHAMBER_AUTO_FAN_TEMPERATURE 30
+#define CHAMBER_AUTO_FAN_SPEED 255
+
+/**
+ * Part-Cooling Fan Multiplexer
+ *
+ * This feature allows you to digitally multiplex the fan output.
+ * The multiplexer is automatically switched at tool-change.
+ * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
+ */
+#define FANMUX0_PIN -1
+#define FANMUX1_PIN -1
+#define FANMUX2_PIN -1
+
+/**
+ * M355 Case Light on-off / brightness
+ */
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+  //#define CASE_LIGHT_PIN 4                  // Override the default pin if needed
+  #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
+  #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
+  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
+  //#define CASE_LIGHT_MAX_PWM 128            // Limit pwm
+  //#define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
+  //#define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
+#endif
+
+// @section homing
+
+// If you want endstops to stay on (by default) even when not homing
+// enable this option. Override at any time with M120, M121.
+//#define ENDSTOPS_ALWAYS_ON_DEFAULT
+
+// @section extras
+
+//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
+
+// Employ an external closed loop controller. Override pins here if needed.
+//#define EXTERNAL_CLOSED_LOOP_CONTROLLER
+#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
+  //#define CLOSED_LOOP_ENABLE_PIN        -1
+  //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
+#endif
+
+/**
+ * Dual Steppers / Dual Endstops
+ *
+ * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes.
+ *
+ * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to
+ * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop
+ * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug
+ * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'.
+ *
+ * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors
+ * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error
+ * in X2. Dual endstop offsets can be set at runtime with 'M666 X<offset> Y<offset> Z<offset>'.
+ */
+
+//#define X_DUAL_STEPPER_DRIVERS
+#if ENABLED(X_DUAL_STEPPER_DRIVERS)
+  #define INVERT_X2_VS_X_DIR true   // Set 'true' if X motors should rotate in opposite directions
+  //#define X_DUAL_ENDSTOPS
+  #if ENABLED(X_DUAL_ENDSTOPS)
+    #define X2_USE_ENDSTOP _XMAX_
+    #define X_DUAL_ENDSTOPS_ADJUSTMENT  0
+  #endif
+#endif
+
+//#define Y_DUAL_STEPPER_DRIVERS
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+  #define INVERT_Y2_VS_Y_DIR true   // Set 'true' if Y motors should rotate in opposite directions
+  //#define Y_DUAL_ENDSTOPS
+  #if ENABLED(Y_DUAL_ENDSTOPS)
+    #define Y2_USE_ENDSTOP _YMAX_
+    #define Y_DUAL_ENDSTOPS_ADJUSTMENT  0
+  #endif
+#endif
+
+//#define Z_DUAL_STEPPER_DRIVERS
+#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
+  //#define Z_DUAL_ENDSTOPS
+  #if ENABLED(Z_DUAL_ENDSTOPS)
+    #define Z2_USE_ENDSTOP _XMAX_
+    #define Z_DUAL_ENDSTOPS_ADJUSTMENT  0
+  #endif
+#endif
+
+//#define Z_TRIPLE_STEPPER_DRIVERS
+#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
+  //#define Z_TRIPLE_ENDSTOPS
+  #if ENABLED(Z_TRIPLE_ENDSTOPS)
+    #define Z2_USE_ENDSTOP _XMAX_
+    #define Z3_USE_ENDSTOP _YMAX_
+    #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2  0
+    #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3  0
+  #endif
+#endif
+
+/**
+ * Dual X Carriage
+ *
+ * This setup has two X carriages that can move independently, each with its own hotend.
+ * The carriages can be used to print an object with two colors or materials, or in
+ * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
+ * The inactive carriage is parked automatically to prevent oozing.
+ * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
+ * By default the X2 stepper is assigned to the first unused E plug on the board.
+ *
+ * The following Dual X Carriage modes can be selected with M605 S<mode>:
+ *
+ *   0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
+ *       results as long as it supports dual X-carriages. (M605 S0)
+ *
+ *   1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
+ *       that additional slicer support is not required. (M605 S1)
+ *
+ *   2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
+ *       the first X-carriage and extruder, to print 2 copies of the same object at the same time.
+ *       Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
+ *       follow with M605 S2 to initiate duplicated movement.
+ *
+ *   3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
+ *       the movement of the first except the second extruder is reversed in the X axis.
+ *       Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
+ *       follow with M605 S3 to initiate mirrored movement.
+ */
+//#define DUAL_X_CARRIAGE
+#if ENABLED(DUAL_X_CARRIAGE)
+  #define X1_MIN_POS X_MIN_POS   // Set to X_MIN_POS
+  #define X1_MAX_POS X_BED_SIZE  // Set a maximum so the first X-carriage can't hit the parked second X-carriage
+  #define X2_MIN_POS    80       // Set a minimum to ensure the  second X-carriage can't hit the parked first X-carriage
+  #define X2_MAX_POS   353       // Set this to the distance between toolheads when both heads are homed
+  #define X2_HOME_DIR    1       // Set to 1. The second X-carriage always homes to the maximum endstop position
+  #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS.
+                      // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
+                      // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
+                      // without modifying the firmware (through the "M218 T1 X???" command).
+                      // Remember: you should set the second extruder x-offset to 0 in your slicer.
+
+  // This is the default power-up mode which can be later using M605.
+  #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
+
+  // Default x offset in duplication mode (typically set to half print bed width)
+  #define DEFAULT_DUPLICATION_X_OFFSET 100
+
+#endif // DUAL_X_CARRIAGE
+
+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
+// @section homing
+
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
+#define X_HOME_BUMP_MM 5
+#define Y_HOME_BUMP_MM 5
+#define Z_HOME_BUMP_MM 2
+#define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
+#define QUICK_HOME                       // If homing includes X and Y, do a diagonal move initially
+//#define HOMING_BACKOFF_MM { 2, 2, 2 }  // (mm) Move away from the endstops after homing
+
+// When G28 is called, this option will make Y home before X
+//#define HOME_Y_BEFORE_X
+
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
+#if ENABLED(BLTOUCH)
+  /**
+   * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES
+   * Do not activate settings that the probe might not understand. Clones might misunderstand
+   * advanced commands.
+   *
+   * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then
+   *       check the wiring of the BROWN, RED and ORANGE wires.
+   *
+   * Note: If the trigger signal of your probe is not being recognized, it has been very often
+   *       because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable"
+   *       like they would be with a real switch. So please check the wiring first.
+   *
+   * Settings for all BLTouch and clone probes:
+   */
+
+  // Safety: The probe needs time to recognize the command.
+  //         Minimum command delay (ms). Enable and increase if needed.
+  //#define BLTOUCH_DELAY 500
+
+  /**
+   * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
+   */
+
+  // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
+  //          in special cases, like noisy or filtered input configurations.
+  //#define BLTOUCH_FORCE_SW_MODE
+
+  /**
+   * Settings for BLTouch Smart 3.0 and 3.1
+   * Summary:
+   *   - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes
+   *   - High-Speed mode
+   *   - Disable LCD voltage options
+   */
+
+  /**
+   * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller!
+   * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup.
+   * If disabled, OD mode is the hard-coded default on 3.0
+   * On startup, Marlin will compare its eeprom to this vale. If the selected mode
+   * differs, a mode set eeprom write will be completed at initialization.
+   * Use the option below to force an eeprom write to a V3.1 probe regardless.
+   */
+  #define BLTOUCH_SET_5V_MODE
+
+  /**
+   * Safety: Activate if connecting a probe with an unknown voltage mode.
+   * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0
+   * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write )
+   * To preserve the life of the probe, use this once then turn it off and re-flash.
+   */
+  //#define BLTOUCH_FORCE_MODE_SET
+
+  /**
+   * Use "HIGH SPEED" mode for probing.
+   * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
+   * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
+   * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
+   */
+  //#define BLTOUCH_HS_MODE
+
+  // Safety: Enable voltage mode settings in the LCD menu.
+  //#define BLTOUCH_LCD_VOLTAGE_MENU
+
+#endif // BLTOUCH
+
+/**
+ * Z Steppers Auto-Alignment
+ * Add the G34 command to align multiple Z steppers using a bed probe.
+ */
+//#define Z_STEPPER_AUTO_ALIGN
+#if ENABLED(Z_STEPPER_AUTO_ALIGN)
+  // Define probe X and Y positions for Z1, Z2 [, Z3]
+  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
+
+  // Provide Z stepper positions for more rapid convergence in bed alignment.
+  // Currently requires triple stepper drivers.
+  //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
+  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
+    // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
+    // the Z screw positions in the bed carriage.
+    // Define one position per Z stepper in stepper driver order.
+    #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
+  #else
+    // Amplification factor. Used to scale the correction step up or down.
+    // In case the stepper (spindle) position is further out than the test point.
+    // Use a value > 1. NOTE: This may cause instability
+    #define Z_STEPPER_ALIGN_AMP 1.0
+  #endif
+
+  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_ITERATIONS 3
+
+  // Enable to restore leveling setup after operation
+  #define RESTORE_LEVELING_AFTER_G34
+
+  // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
+  #define G34_MAX_GRADE  5  // (%) Maximum incline G34 will handle
+
+  // Stop criterion. If the accuracy is better than this stop iterating early
+  #define Z_STEPPER_ALIGN_ACC 0.02
+#endif
+
+// @section motion
+
+#define AXIS_RELATIVE_MODES { false, false, false, false }
+
+// Add a Duplicate option for well-separated conjoined nozzles
+//#define MULTI_NOZZLE_DUPLICATION
+
+// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
+#define INVERT_X_STEP_PIN false
+#define INVERT_Y_STEP_PIN false
+#define INVERT_Z_STEP_PIN false
+#define INVERT_E_STEP_PIN false
+
+// Default stepper release if idle. Set to 0 to deactivate.
+// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
+// Time can be set by M18 and M84.
+#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DISABLE_INACTIVE_X true
+#define DISABLE_INACTIVE_Y true
+#define DISABLE_INACTIVE_Z true  // Set to false if the nozzle will fall down on your printed part when print has finished.
+#define DISABLE_INACTIVE_E true
+
+#define DEFAULT_MINIMUMFEEDRATE       0.0     // minimum feedrate
+#define DEFAULT_MINTRAVELFEEDRATE     0.0
+
+//#define HOME_AFTER_DEACTIVATE  // Require rehoming after steppers are deactivated
+
+// Minimum time that a segment needs to take if the buffer is emptied
+#define DEFAULT_MINSEGMENTTIME        20000   // (ms)
+
+// If defined the movements slow down when the look ahead buffer is only half full
+#define SLOWDOWN
+
+// Frequency limit
+// See nophead's blog for more info
+// Not working O
+//#define XY_FREQUENCY_LIMIT  15
+
+// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
+// of the buffer and all stops. This should not be much greater than zero and should only be changed
+// if unwanted behavior is observed on a user's machine when running at very slow speeds.
+#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
+
+//
+// Backlash Compensation
+// Adds extra movement to axes on direction-changes to account for backlash.
+//
+//#define BACKLASH_COMPENSATION
+#if ENABLED(BACKLASH_COMPENSATION)
+  // Define values for backlash distance and correction.
+  // If BACKLASH_GCODE is enabled these values are the defaults.
+  #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
+  #define BACKLASH_CORRECTION    0.0       // 0.0 = no correction; 1.0 = full correction
+
+  // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
+  // to reduce print artifacts. (Enabling this is costly in memory and computation!)
+  //#define BACKLASH_SMOOTHING_MM 3 // (mm)
+
+  // Add runtime configuration and tuning of backlash values (M425)
+  //#define BACKLASH_GCODE
+
+  #if ENABLED(BACKLASH_GCODE)
+    // Measure the Z backlash when probing (G29) and set with "M425 Z"
+    #define MEASURE_BACKLASH_WHEN_PROBING
+
+    #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
+      // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
+      // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
+      // increments while checking for the contact to be broken.
+      #define BACKLASH_MEASUREMENT_LIMIT       0.5   // (mm)
+      #define BACKLASH_MEASUREMENT_RESOLUTION  0.005 // (mm)
+      #define BACKLASH_MEASUREMENT_FEEDRATE    Z_PROBE_SPEED_SLOW // (mm/m)
+    #endif
+  #endif
+#endif
+
+/**
+ * Automatic backlash, position and hotend offset calibration
+ *
+ * Enable G425 to run automatic calibration using an electrically-
+ * conductive cube, bolt, or washer mounted on the bed.
+ *
+ * G425 uses the probe to touch the top and sides of the calibration object
+ * on the bed and measures and/or correct positional offsets, axis backlash
+ * and hotend offsets.
+ *
+ * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within
+ *       ±5mm of true values for G425 to succeed.
+ */
+//#define CALIBRATION_GCODE
+#if ENABLED(CALIBRATION_GCODE)
+
+  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
+
+  #define CALIBRATION_FEEDRATE_SLOW             60    // mm/m
+  #define CALIBRATION_FEEDRATE_FAST           1200    // mm/m
+  #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/m
+
+  // The following parameters refer to the conical section of the nozzle tip.
+  #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // mm
+  #define CALIBRATION_NOZZLE_OUTER_DIAMETER      2.0  // mm
+
+  // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
+  //#define CALIBRATION_REPORTING
+
+  // The true location and dimension the cube/bolt/washer on the bed.
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
+
+  // Comment out any sides which are unreachable by the probe. For best
+  // auto-calibration results, all sides must be reachable.
+  #define CALIBRATION_MEASURE_RIGHT
+  #define CALIBRATION_MEASURE_FRONT
+  #define CALIBRATION_MEASURE_LEFT
+  #define CALIBRATION_MEASURE_BACK
+
+  // Probing at the exact top center only works if the center is flat. If
+  // probing on a screwhead or hollow washer, probe near the edges.
+  //#define CALIBRATION_MEASURE_AT_TOP_EDGES
+
+  // Define pin which is read during calibration
+  #ifndef CALIBRATION_PIN
+    #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
+    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
+    //#define CALIBRATION_PIN_PULLDOWN
+    #define CALIBRATION_PIN_PULLUP
+  #endif
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
+/**
+ * Custom Microstepping
+ * Override as-needed for your setup. Up to 3 MS pins are supported.
+ */
+//#define MICROSTEP1 LOW,LOW,LOW
+//#define MICROSTEP2 HIGH,LOW,LOW
+//#define MICROSTEP4 LOW,HIGH,LOW
+//#define MICROSTEP8 HIGH,HIGH,LOW
+//#define MICROSTEP16 LOW,LOW,HIGH
+//#define MICROSTEP32 HIGH,LOW,HIGH
+
+// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
+
+/**
+ *  @section  stepper motor current
+ *
+ *  Some boards have a means of setting the stepper motor current via firmware.
+ *
+ *  The power on motor currents are set by:
+ *    PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
+ *                         known compatible chips: A4982
+ *    DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
+ *                         known compatible chips: AD5206
+ *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
+ *                         known compatible chips: MCP4728
+ *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
+ *                         known compatible chips: MCP4451, MCP4018
+ *
+ *  Motor currents can also be set by M907 - M910 and by the LCD.
+ *    M907 - applies to all.
+ *    M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
+ *    M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
+ */
+//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 }          // Values in milliamps
+//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 }   // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 }    // Default drive percent - X, Y, Z, E axis
+
+// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
+//#define DIGIPOT_I2C
+#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A)
+  /**
+   * Common slave addresses:
+   *
+   *                        A   (A shifted)   B   (B shifted)  IC
+   * Smoothie              0x2C (0x58)       0x2D (0x5A)       MCP4451
+   * AZTEEG_X3_PRO         0x2C (0x58)       0x2E (0x5C)       MCP4451
+   * AZTEEG_X5_MINI        0x2C (0x58)       0x2E (0x5C)       MCP4451
+   * AZTEEG_X5_MINI_WIFI         0x58              0x5C        MCP4451
+   * MIGHTYBOARD_REVE      0x2F (0x5E)                         MCP4018
+   */
+  #define DIGIPOT_I2C_ADDRESS_A 0x2C  // unshifted slave address for first DIGIPOT
+  #define DIGIPOT_I2C_ADDRESS_B 0x2D  // unshifted slave address for second DIGIPOT
+#endif
+
+//#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
+#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8     MKS SBASE: 5
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
+#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
+
+//===========================================================================
+//=============================Additional Features===========================
+//===========================================================================
+
+// @section lcd
+
+#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
+  #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm)
+  #if ENABLED(ULTIPANEL)
+    #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
+    #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen
+  #endif
+#endif
+
+// Change values more rapidly when the encoder is rotated faster
+#define ENCODER_RATE_MULTIPLIER
+#if ENABLED(ENCODER_RATE_MULTIPLIER)
+  #define ENCODER_10X_STEPS_PER_SEC   30  // (steps/s) Encoder rate for 10x speed
+  #define ENCODER_100X_STEPS_PER_SEC  80  // (steps/s) Encoder rate for 100x speed
+#endif
+
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+  #define FEEDRATE_CHANGE_BEEP_DURATION   10
+  #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
+#if HAS_LCD_MENU
+
+  // Include a page of printer information in the LCD Main Menu
+  #define LCD_INFO_MENU
+  #if ENABLED(LCD_INFO_MENU)
+    //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+  #endif
+
+  // BACK menu items keep the highlight at the top
+  //#define TURBO_BACK_MENU_ITEM
+
+  /**
+   * LED Control Menu
+   * Add LED Control to the LCD menu
+   */
+  //#define LED_CONTROL_MENU
+  #if ENABLED(LED_CONTROL_MENU)
+    #define LED_COLOR_PRESETS                 // Enable the Preset Color menu option
+    #if ENABLED(LED_COLOR_PRESETS)
+      #define LED_USER_PRESET_RED        255  // User defined RED value
+      #define LED_USER_PRESET_GREEN      128  // User defined GREEN value
+      #define LED_USER_PRESET_BLUE         0  // User defined BLUE value
+      #define LED_USER_PRESET_WHITE      255  // User defined WHITE value
+      #define LED_USER_PRESET_BRIGHTNESS 255  // User defined intensity
+      //#define LED_USER_PRESET_STARTUP       // Have the printer display the user preset color on startup
+    #endif
+  #endif
+
+#endif // HAS_LCD_MENU
+
+// Scroll a longer status message into view
+#define STATUS_MESSAGE_SCROLLING
+
+// On the Info Screen, display XY with one decimal place when possible
+//#define LCD_DECIMAL_SMALL_XY
+
+// The timeout (in ms) to return to the status screen from sub-menus
+//#define LCD_TIMEOUT_TO_STATUS 15000
+
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+// Show the E position (filament used) during printing
+//#define LCD_SHOW_E_TOTAL
+
+#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
+  //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
+  //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
+    //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
+#endif
+
+#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif
+
+#if ENABLED(SDSUPPORT)
+
+  // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
+  // around this by connecting a push button or single throw switch to the pin defined
+  // as SD_DETECT_PIN in your board's pins definitions.
+  // This setting should be disabled unless you are using a push button, pulling the pin to ground.
+  // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
+  #define SD_DETECT_INVERTED
+
+  #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
+  #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
+
+  // Reverse SD sort to show "more recent" files first, according to the card's FAT.
+  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
+  #define SDCARD_RATHERRECENTFIRST
+
+  #define SD_MENU_CONFIRM_START             // Confirm the selected SD file before printing
+
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
+    //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
+    //#define POWER_LOSS_PIN         44 // Pin to detect power loss
+    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
+    //#define POWER_LOSS_PULL           // Set pullup / pulldown as appropriate
+    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
+    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
+
+    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
+    // especially with "vase mode" printing. Set too high and vases cannot be continued.
+    #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
+  #endif
+
+  /**
+   * Sort SD file listings in alphabetical order.
+   *
+   * With this option enabled, items on SD cards will be sorted
+   * by name for easier navigation.
+   *
+   * By default...
+   *
+   *  - Use the slowest -but safest- method for sorting.
+   *  - Folders are sorted to the top.
+   *  - The sort key is statically allocated.
+   *  - No added G-code (M34) support.
+   *  - 40 item sorting limit. (Items after the first 40 are unsorted.)
+   *
+   * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
+   * compiler to calculate the worst-case usage and throw an error if the SRAM
+   * limit is exceeded.
+   *
+   *  - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
+   *  - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
+   *  - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
+   *  - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
+   */
+  #define SDCARD_SORT_ALPHA
+
+  // SD Card Sorting options
+  #if ENABLED(SDCARD_SORT_ALPHA)
+    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
+    #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
+    #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+    #define SDSORT_USES_RAM    true   // Pre-allocate a static array for faster pre-sorting.
+    #define SDSORT_USES_STACK  true   // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+    #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+    #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
+  #endif
+
+  // This allows hosts to request long names for files and folders with M33
+  //#define LONG_FILENAME_HOST_SUPPORT
+
+  // Enable this option to scroll long filenames in the SD card menu
+  #define SCROLL_LONG_FILENAMES
+
+  // Leave the heaters on after Stop Print (not recommended!)
+  //#define SD_ABORT_NO_COOLDOWN
+
+  /**
+   * This option allows you to abort SD printing when any endstop is triggered.
+   * This feature must be enabled with "M540 S1" or from the LCD menu.
+   * To have any effect, endstops must be enabled during SD printing.
+   */
+  //#define SD_ABORT_ON_ENDSTOP_HIT
+
+  /**
+   * This option makes it easier to print the same SD Card file again.
+   * On print completion the LCD Menu will open with the file selected.
+   * You can just click to start the print, or navigate elsewhere.
+   */
+  //#define SD_REPRINT_LAST_SELECTED_FILE
+
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
+  /**
+   * Support for USB thumb drives using an Arduino USB Host Shield or
+   * equivalent MAX3421E breakout board. The USB thumb drive will appear
+   * to Marlin as an SD card.
+   *
+   * The MAX3421E can be assigned the same pins as the SD card reader, with
+   * the following pin mapping:
+   *
+   *    SCLK, MOSI, MISO --> SCLK, MOSI, MISO
+   *    INT              --> SD_DETECT_PIN [1]
+   *    SS               --> SDSS
+   *
+   * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
+   */
+  //#define USB_FLASH_DRIVE_SUPPORT
+  #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
+    #define USB_CS_PIN    SDSS
+    #define USB_INTR_PIN  SD_DETECT_PIN
+
+    /**
+     * USB Host Shield Library
+     *
+     * - UHS2 uses no interrupts and has been production-tested
+     *   on a LulzBot TAZ Pro with a 32-bit Archim board.
+     *
+     * - UHS3 is newer code with better USB compatibility. But it
+     *   is less tested and is known to interfere with Servos.
+     *   [1] This requires USB_INTR_PIN to be interrupt-capable.
+     */
+    //#define USE_UHS3_USB
+  #endif
+
+  /**
+   * When using a bootloader that supports SD-Firmware-Flashing,
+   * add a menu item to activate SD-FW-Update on the next reboot.
+   *
+   * Requires ATMEGA2560 (Arduino Mega)
+   *
+   * Tested with this bootloader:
+   *   https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
+   */
+  //#define SD_FIRMWARE_UPDATE
+  #if ENABLED(SD_FIRMWARE_UPDATE)
+    #define SD_FIRMWARE_UPDATE_EEPROM_ADDR    0x1FF
+    #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE   0xF0
+    #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
+  #endif
+
+  // Add an optimized binary file transfer mode, initiated with 'M28 B1'
+  //#define BINARY_FILE_TRANSFER
+
+  #if HAS_SDCARD_CONNECTION
+    /**
+     * Set this option to one of the following (or the board's defaults apply):
+     *
+     *           LCD - Use the SD drive in the external LCD controller.
+     *       ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
+     *  CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file).
+     *
+     * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
+     */
+    //#define SDCARD_CONNECTION LCD
+  #endif
+
+#endif // SDSUPPORT
+
+/**
+ * By default an onboard SD card reader may be shared as a USB mass-
+ * storage device. This option hides the SD card from the host PC.
+ */
+//#define NO_SD_HOST_DRIVE   // Disable SD Card access over USB (for security).
+
+/**
+ * Additional options for Graphical Displays
+ *
+ * Use the optimizations here to improve printing performance,
+ * which can be adversely affected by graphical display drawing,
+ * especially when doing several short moves, and when printing
+ * on DELTA and SCARA machines.
+ *
+ * Some of these options may result in the display lagging behind
+ * controller events, as there is a trade-off between reliable
+ * printing performance versus fast display updates.
+ */
+#if HAS_GRAPHICAL_LCD
+  // Show SD percentage next to the progress bar
+  #define DOGM_SD_PERCENT
+
+  // Enable to save many cycles by drawing a hollow frame on the Info Screen
+  #define XYZ_HOLLOW_FRAME
+
+  // Enable to save many cycles by drawing a hollow frame on Menu Screens
+  #define MENU_HOLLOW_FRAME
+
+  // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
+  // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
+  //#define USE_BIG_EDIT_FONT
+
+  // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
+  // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
+  //#define USE_SMALL_INFOFONT
+
+  // Enable this option and reduce the value to optimize screen updates.
+  // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
+  //#define DOGM_SPI_DELAY_US 5
+
+  // Swap the CW/CCW indicators in the graphics overlay
+  //#define OVERLAY_GFX_REVERSE
+
+  /**
+   * ST7920-based LCDs can emulate a 16 x 4 character display using
+   * the ST7920 character-generator for very fast screen updates.
+   * Enable LIGHTWEIGHT_UI to use this special display mode.
+   *
+   * Since LIGHTWEIGHT_UI has limited space, the position and status
+   * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+   * length of time to display the status message before clearing.
+   *
+   * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+   * This will prevent position updates from being displayed.
+   */
+  #if ENABLED(U8GLIB_ST7920)
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
+  /**
+   * Status (Info) Screen customizations
+   * These options may affect code size and screen render time.
+   * Custom status screens can forcibly override these settings.
+   */
+  //#define STATUS_COMBINE_HEATERS    // Use combined heater images instead of separate ones
+  //#define STATUS_HOTEND_NUMBERLESS  // Use plain hotend icons instead of numbered ones (with 2+ hotends)
+  #define STATUS_HOTEND_INVERTED      // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
+  #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
+  #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
+  #define STATUS_CHAMBER_ANIM         // Use a second bitmap to indicate chamber heating
+  //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
+  //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
+  //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
+  //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
+
+  // Frivolous Game Options
+  //#define MARLIN_BRICKOUT
+  //#define MARLIN_INVADERS
+  //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
+
+#endif // HAS_GRAPHICAL_LCD
+
+//
+// Touch UI for the FTDI Embedded Video Engine (EVE)
+//
+#if ENABLED(TOUCH_UI_FTDI_EVE)
+  // Display board used
+  //#define LCD_FTDI_VM800B35A        // FTDI 3.5" with FT800 (320x240)
+  //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+  //#define LCD_HAOYU_FT800CB         // Haoyu with 4.3" or 5" (480x272)
+  //#define LCD_HAOYU_FT810CB         // Haoyu with 5" (800x480)
+  //#define LCD_ALEPHOBJECTS_CLCD_UI  // Aleph Objects Color LCD UI
+
+  // Correct the resolution if not using the stock TFT panel.
+  //#define TOUCH_UI_320x240
+  //#define TOUCH_UI_480x272
+  //#define TOUCH_UI_800x480
+
+  // Mappings for boards with a standard RepRapDiscount Display connector
+  //#define AO_EXP1_PINMAP    // AlephObjects CLCD UI EXP1 mapping
+  //#define AO_EXP2_PINMAP    // AlephObjects CLCD UI EXP2 mapping
+  //#define CR10_TFT_PINMAP   // Rudolph Riedel's CR10 pin mapping
+  //#define OTHER_PIN_LAYOUT  // Define pins manually below
+  #if ENABLED(OTHER_PIN_LAYOUT)
+    // The pins for CS and MOD_RESET (PD) must be chosen.
+    #define CLCD_MOD_RESET  9
+    #define CLCD_SPI_CS    10
+
+    // If using software SPI, specify pins for SCLK, MOSI, MISO
+    //#define CLCD_USE_SOFT_SPI
+    #if ENABLED(CLCD_USE_SOFT_SPI)
+      #define CLCD_SOFT_SPI_MOSI 11
+      #define CLCD_SOFT_SPI_MISO 12
+      #define CLCD_SOFT_SPI_SCLK 13
+    #endif
+  #endif
+
+  // Display Orientation. An inverted (i.e. upside-down) display
+  // is supported on the FT800. The FT810 and beyond also support
+  // portrait and mirrored orientations.
+  //#define TOUCH_UI_INVERTED
+  //#define TOUCH_UI_PORTRAIT
+  //#define TOUCH_UI_MIRRORED
+
+  // UTF8 processing and rendering.
+  // Unsupported characters are shown as '?'.
+  //#define TOUCH_UI_USE_UTF8
+  #if ENABLED(TOUCH_UI_USE_UTF8)
+    // Western accents support. These accented characters use
+    // combined bitmaps and require relatively little storage.
+    #define TOUCH_UI_UTF8_WESTERN_CHARSET
+    #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET)
+      // Additional character groups. These characters require
+      // full bitmaps and take up considerable storage:
+      //#define TOUCH_UI_UTF8_SUPERSCRIPTS  // ¹ ² ³
+      //#define TOUCH_UI_UTF8_COPYRIGHT     // © ®
+      //#define TOUCH_UI_UTF8_GERMANIC      // ß
+      //#define TOUCH_UI_UTF8_SCANDINAVIAN  // Æ Ð Ø Þ æ ð ø þ
+      //#define TOUCH_UI_UTF8_PUNCTUATION   // « » ¿ ¡
+      //#define TOUCH_UI_UTF8_CURRENCY      // ¢ £ ¤ ¥
+      //#define TOUCH_UI_UTF8_ORDINALS      // º ª
+      //#define TOUCH_UI_UTF8_MATHEMATICS   // ± × ÷
+      //#define TOUCH_UI_UTF8_FRACTIONS     // ¼ ½ ¾
+      //#define TOUCH_UI_UTF8_SYMBOLS       // µ ¶ ¦ § ¬
+    #endif
+  #endif
+
+  // Use a smaller font when labels don't fit buttons
+  #define TOUCH_UI_FIT_TEXT
+
+  // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE)
+  //#define LCD_LANGUAGE_1 en
+  //#define LCD_LANGUAGE_2 fr
+  //#define LCD_LANGUAGE_3 de
+  //#define LCD_LANGUAGE_4 es
+  //#define LCD_LANGUAGE_5 it
+
+  // Use a numeric passcode for "Screen lock" keypad.
+  // (recommended for smaller displays)
+  //#define TOUCH_UI_PASSCODE
+
+  // Output extra debug info for Touch UI events
+  //#define TOUCH_UI_DEBUG
+
+  // Developer menu (accessed by touching "About Printer" copyright text)
+  //#define TOUCH_UI_DEVELOPER_MENU
+#endif
+
+//
+// FSMC Graphical TFT
+//
+#if ENABLED(FSMC_GRAPHICAL_TFT)
+  //#define TFT_MARLINUI_COLOR 0xFFFF // White
+  //#define TFT_MARLINBG_COLOR 0x0000 // Black
+  //#define TFT_DISABLED_COLOR 0x0003 // Almost black
+  //#define TFT_BTCANCEL_COLOR 0xF800 // Red
+  //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow
+  //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
+#endif
+
+// @section safety
+
+/**
+ * The watchdog hardware timer will do a reset and disable all outputs
+ * if the firmware gets too overloaded to read the temperature sensors.
+ *
+ * If you find that watchdog reboot causes your AVR board to hang forever,
+ * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
+ * NOTE: This method is less reliable as it can only catch hangups while
+ * interrupts are enabled.
+ */
+#define USE_WATCHDOG
+#if ENABLED(USE_WATCHDOG)
+  //#define WATCHDOG_RESET_MANUAL
+#endif
+
+// @section lcd
+
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
+#define BABYSTEPPING
+#if ENABLED(BABYSTEPPING)
+  //#define BABYSTEP_WITHOUT_HOMING
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR_Z  5       // Babysteps are very small. Increase for faster motion.
+  #define BABYSTEP_MULTIPLICATOR_XY 5
+
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING    // Double-click on the Status Screen for Z Babystepping.
+  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
+                                            // Note: Extra time may be added to mitigate controller latency.
+    //#define BABYSTEP_ALWAYS_AVAILABLE     // Allow babystepping at all times (not just during movement).
+    //#define MOVE_Z_WHEN_IDLE              // Jump to the move Z menu on doubleclick when printer is idle.
+    #if ENABLED(MOVE_Z_WHEN_IDLE)
+      #define MOVE_Z_IDLE_MULTIPLICATOR 1   // Multiply 1mm by this factor for the move step size.
+    #endif
+  #endif
+
+  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
+  #endif
+#endif
+
+// @section extruder
+
+/**
+ * Linear Pressure Control v1.5
+ *
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
+ * K=0 means advance disabled.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
+ */
+//#define LIN_ADVANCE
+#if ENABLED(LIN_ADVANCE)
+  //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
+  #define LIN_ADVANCE_K 0.22    // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG            // If enabled, this will generate debug information output over USB.
+#endif
+
+// @section leveling
+
+/**
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Override MIN_PROBE_EDGE for each side of the build plate
+ * Useful to get probe points to exact positions on targets or
+ * to allow leveling to avoid plate clamps on only specific
+ * sides of the bed.
+ *
+ * If you are replacing the prior *_PROBE_BED_POSITION options,
+ * LEFT and FRONT values in most cases will map directly over
+ * RIGHT and REAR would be the inverse such as
+ * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION)
+ *
+ * This will allow all positions to match at compilation, however
+ * should the probe position be modified with M851XY then the
+ * probe points will follow. This prevents any change from causing
+ * the probe to be unable to reach any points.
+ */
+#if PROBE_SELECTED && !IS_KINEMATIC
+  //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
+  //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
+  //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
+  //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
+#endif
+
+#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
+  // Override the mesh area if the automatic (max) area is too large
+  //#define MESH_MIN_X MESH_INSET
+  //#define MESH_MIN_Y MESH_INSET
+  //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
+  //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+#endif
+
+/**
+ * Repeatedly attempt G29 leveling until it succeeds.
+ * Stop after G29_MAX_RETRIES attempts.
+ */
+//#define G29_RETRY_AND_RECOVER
+#if ENABLED(G29_RETRY_AND_RECOVER)
+  #define G29_MAX_RETRIES 3
+  #define G29_HALT_ON_FAILURE
+  /**
+   * Specify the GCODE commands that will be executed when leveling succeeds,
+   * between attempts, and after the maximum number of retries have been tried.
+   */
+  #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
+  #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
+  #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
+
+#endif
+
+// @section extras
+
+//
+// G2/G3 Arc Support
+//
+#define ARC_SUPPORT               // Disable this feature to save ~3226 bytes
+#if ENABLED(ARC_SUPPORT)
+  #define MM_PER_ARC_SEGMENT  1   // Length of each arc segment
+  #define MIN_ARC_SEGMENTS   24   // Minimum number of segments in a complete circle
+  #define N_ARC_CORRECTION   25   // Number of interpolated segments between corrections
+  //#define ARC_P_CIRCLES         // Enable the 'P' parameter to specify complete circles
+  //#define CNC_WORKSPACE_PLANES  // Allow G2/G3 to operate in XY, ZX, or YZ planes
+#endif
+
+// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
+//#define BEZIER_CURVE_SUPPORT
+
+/**
+ * G38 Probe Target
+ *
+ * This option adds G38.2 and G38.3 (probe towards target)
+ * and optionally G38.4 and G38.5 (probe away from target).
+ * Set MULTIPLE_PROBING for G38 to probe more than once.
+ */
+//#define G38_PROBE_TARGET
+#if ENABLED(G38_PROBE_TARGET)
+  //#define G38_PROBE_AWAY        // Include G38.4 and G38.5 to probe away from target
+  #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
+#endif
+
+// Moves (or segments) with fewer steps than this will be joined with the next move
+#define MIN_STEPS_PER_SEGMENT 6
+
+/**
+ * Minimum delay before and after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   400 : Minimum for A5984 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MINIMUM_STEPPER_POST_DIR_DELAY 650
+//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
+ *   1 : Minimum for A4988 and A5984 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  5000000 : Maximum for TMC2xxx stepper drivers
+ *  1000000 : Maximum for LV8729 stepper driver
+ *  500000  : Maximum for A4988 stepper driver
+ *  250000  : Maximum for DRV8825 stepper driver
+ *  150000  : Maximum for TB6600 stepper driver
+ *   15000  : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
+
+// @section temperature
+
+// Control heater 0 and heater 1 in parallel.
+//#define HEATERS_PARALLEL
+
+//===========================================================================
+//================================= Buffers =================================
+//===========================================================================
+
+// @section hidden
+
+// The number of linear motions that can be in the plan at any give time.
+// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
+#if ENABLED(SDSUPPORT)
+  #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+#else
+  #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+#endif
+
+// @section serial
+
+// The ASCII buffer for serial input
+#define MAX_CMD_SIZE 96
+#define BUFSIZE 4
+
+// Transmission to Host Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+#define TX_BUFFER_SIZE 0
+
+// Host Receive Buffer Size
+// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+// To use flow control, set this buffer size to at least 1024 bytes.
+// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+//#define RX_BUFFER_SIZE 1024
+
+#if RX_BUFFER_SIZE >= 1024
+  // Enable to have the controller send XON/XOFF control characters to
+  // the host to signal the RX buffer is becoming full.
+  //#define SERIAL_XON_XOFF
+#endif
+
+// Add M575 G-code to change the baud rate
+//#define BAUD_RATE_GCODE
+
+#if ENABLED(SDSUPPORT)
+  // Enable this option to collect and display the maximum
+  // RX queue usage after transferring a file to SD.
+  //#define SERIAL_STATS_MAX_RX_QUEUED
+
+  // Enable this option to collect and display the number
+  // of dropped bytes after a file transfer to SD.
+  //#define SERIAL_STATS_DROPPED_RX
+#endif
+
+// Enable an emergency-command parser to intercept certain commands as they
+// enter the serial receive buffer, so they cannot be blocked.
+// Currently handles M108, M112, M410
+// Does not work on boards using AT90USB (USBCON) processors!
+#define EMERGENCY_PARSER
+
+// Bad Serial-connections can miss a received command by sending an 'ok'
+// Therefore some clients abort after 30 seconds in a timeout.
+// Some other clients start sending commands while receiving a 'wait'.
+// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
+//#define NO_TIMEOUTS 1000 // Milliseconds
+
+// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
+#define ADVANCED_OK
+
+// Printrun may have trouble receiving long strings all at once.
+// This option inserts short delays between lines of serial output.
+#define SERIAL_OVERRUN_PROTECTION
+
+// @section extras
+
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ *   'M106 P<fan> T3-255' : Set a secondary speed for <fan>
+ *   'M106 P<fan> T2'     : Use the set secondary speed
+ *   'M106 P<fan> T1'     : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
+/**
+ * Firmware-based and LCD-controlled retract
+ *
+ * Add G10 / G11 commands for automatic firmware-based retract / recover.
+ * Use M207 and M208 to define parameters for retract / recover.
+ *
+ * Use M209 to enable or disable auto-retract.
+ * With auto-retract enabled, all G1 E moves within the set range
+ * will be converted to firmware-based retract/recover moves.
+ *
+ * Be sure to turn off auto-retract during filament change.
+ *
+ * Note that M207 / M208 / M209 settings are saved to EEPROM.
+ *
+ */
+//#define FWRETRACT
+#if ENABLED(FWRETRACT)
+  #define FWRETRACT_AUTORETRACT           // Override slicer retractions
+  #if ENABLED(FWRETRACT_AUTORETRACT)
+    #define MIN_AUTORETRACT 0.1           // (mm) Don't convert E moves under this length
+    #define MAX_AUTORETRACT 10.0          // (mm) Don't convert E moves over this length
+  #endif
+  #define RETRACT_LENGTH 3                // (mm) Default retract length (positive value)
+  #define RETRACT_LENGTH_SWAP 13          // (mm) Default swap retract length (positive value)
+  #define RETRACT_FEEDRATE 45             // (mm/s) Default feedrate for retracting
+  #define RETRACT_ZRAISE 0                // (mm) Default retract Z-raise
+  #define RETRACT_RECOVER_LENGTH 0        // (mm) Default additional recover length (added to retract length on recover)
+  #define RETRACT_RECOVER_LENGTH_SWAP 0   // (mm) Default additional swap recover length (added to retract length on recover from toolchange)
+  #define RETRACT_RECOVER_FEEDRATE 8      // (mm/s) Default feedrate for recovering from retraction
+  #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction
+  #if ENABLED(MIXING_EXTRUDER)
+    //#define RETRACT_SYNC_MIXING         // Retract and restore all mixing steppers simultaneously
+  #endif
+#endif
+
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+  // Z raise distance for tool-change, as needed for some extruders
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+  //#define TOOLCHANGE_NO_RETURN   // Never return to the previous position on tool-change
+
+  // Retract and prime filament on tool-change
+  //#define TOOLCHANGE_FILAMENT_SWAP
+  #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          12  // (mm)
+    #define TOOLCHANGE_FIL_EXTRA_PRIME           2  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
+  #endif
+
+  /**
+   * Position to park head during tool change.
+   * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+   */
+  //#define TOOLCHANGE_PARK
+  #if ENABLED(TOOLCHANGE_PARK)
+    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
+  #endif
+#endif
+
+/**
+ * Advanced Pause
+ * Experimental feature for filament change support and for parking the nozzle when paused.
+ * Adds the GCode M600 for initiating filament change.
+ * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
+ *
+ * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
+ * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
+ */
+#define ADVANCED_PAUSE_FEATURE
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     41  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      430  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE  41  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   430  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         20  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+  #define ADVANCED_PAUSE_RESUME_PRIME          0  // (mm) Extra distance to prime nozzle after returning from park.
+  //#define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_PURGE_RETRACT        4  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_PURGE_DELAY       5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         0  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS          6  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+#endif
+
+// @section tmc
+
+/**
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
+ */
+#if HAS_DRIVER(TMC26X)
+
+  #if AXIS_DRIVER_TYPE_X(TMC26X)
+    #define X_MAX_CURRENT     1000  // (mA)
+    #define X_SENSE_RESISTOR    91  // (mOhms)
+    #define X_MICROSTEPS        16  // Number of microsteps
+  #endif
+
+  #if AXIS_DRIVER_TYPE_X2(TMC26X)
+    #define X2_MAX_CURRENT    1000
+    #define X2_SENSE_RESISTOR   91
+    #define X2_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Y(TMC26X)
+    #define Y_MAX_CURRENT     1000
+    #define Y_SENSE_RESISTOR    91
+    #define Y_MICROSTEPS        16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Y2(TMC26X)
+    #define Y2_MAX_CURRENT    1000
+    #define Y2_SENSE_RESISTOR   91
+    #define Y2_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Z(TMC26X)
+    #define Z_MAX_CURRENT     1000
+    #define Z_SENSE_RESISTOR    91
+    #define Z_MICROSTEPS        16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Z2(TMC26X)
+    #define Z2_MAX_CURRENT    1000
+    #define Z2_SENSE_RESISTOR   91
+    #define Z2_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Z3(TMC26X)
+    #define Z3_MAX_CURRENT    1000
+    #define Z3_SENSE_RESISTOR   91
+    #define Z3_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E0(TMC26X)
+    #define E0_MAX_CURRENT    1000
+    #define E0_SENSE_RESISTOR   91
+    #define E0_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E1(TMC26X)
+    #define E1_MAX_CURRENT    1000
+    #define E1_SENSE_RESISTOR   91
+    #define E1_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E2(TMC26X)
+    #define E2_MAX_CURRENT    1000
+    #define E2_SENSE_RESISTOR   91
+    #define E2_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E3(TMC26X)
+    #define E3_MAX_CURRENT    1000
+    #define E3_SENSE_RESISTOR   91
+    #define E3_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E4(TMC26X)
+    #define E4_MAX_CURRENT    1000
+    #define E4_SENSE_RESISTOR   91
+    #define E4_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E5(TMC26X)
+    #define E5_MAX_CURRENT    1000
+    #define E5_SENSE_RESISTOR   91
+    #define E5_MICROSTEPS       16
+  #endif
+
+#endif // TMC26X
+
+// @section tmc_smart
+
+/**
+ * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode
+ * connect your SPI pins to the hardware SPI interface on your board and define
+ * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3
+ * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN
+ * to the driver side PDN_UART pin with a 1K resistor.
+ * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without
+ * a resistor.
+ * The drivers can also be used with hardware serial.
+ *
+ * TMCStepper library is required to use TMC stepper drivers.
+ * https://github.com/teemuatlut/TMCStepper
+ */
+#if HAS_TRINAMIC
+
+  #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
+  #define INTERPOLATE       true  // Interpolate X/Y/Z_MICROSTEPS to 256
+
+  #if AXIS_IS_TMC(X)
+    #define X_CURRENT       650        // (mA) RMS current. Multiply by 1.414 for peak current.
+    #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
+    #define X_MICROSTEPS     16    // 0..256
+    #define X_RSENSE          0.11
+    #define X_CHAIN_POS      -1    // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ...
+  #endif
+
+  #if AXIS_IS_TMC(X2)
+    #define X2_CURRENT      800
+    #define X2_CURRENT_HOME X2_CURRENT
+    #define X2_MICROSTEPS    16
+    #define X2_RSENSE         0.11
+    #define X2_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(Y)
+    #define Y_CURRENT       650
+    #define Y_CURRENT_HOME  Y_CURRENT
+    #define Y_MICROSTEPS     16
+    #define Y_RSENSE          0.11
+    #define Y_CHAIN_POS      -1
+  #endif
+
+  #if AXIS_IS_TMC(Y2)
+    #define Y2_CURRENT      800
+    #define Y2_CURRENT_HOME Y2_CURRENT
+    #define Y2_MICROSTEPS    16
+    #define Y2_RSENSE         0.11
+    #define Y2_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(Z)
+    #define Z_CURRENT       580
+    #define Z_CURRENT_HOME  Z_CURRENT
+    #define Z_MICROSTEPS     16
+    #define Z_RSENSE          0.11
+    #define Z_CHAIN_POS      -1
+  #endif
+
+  #if AXIS_IS_TMC(Z2)
+    #define Z2_CURRENT      800
+    #define Z2_CURRENT_HOME Z2_CURRENT
+    #define Z2_MICROSTEPS    16
+    #define Z2_RSENSE         0.11
+    #define Z2_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(Z3)
+    #define Z3_CURRENT      800
+    #define Z3_CURRENT_HOME Z3_CURRENT
+    #define Z3_MICROSTEPS    16
+    #define Z3_RSENSE         0.11
+    #define Z3_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(E0)
+    #define E0_CURRENT      650
+    #define E0_MICROSTEPS    16
+    #define E0_RSENSE         0.11
+    #define E0_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(E1)
+    #define E1_CURRENT      800
+    #define E1_MICROSTEPS    16
+    #define E1_RSENSE         0.11
+    #define E1_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(E2)
+    #define E2_CURRENT      800
+    #define E2_MICROSTEPS    16
+    #define E2_RSENSE         0.11
+    #define E2_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(E3)
+    #define E3_CURRENT      800
+    #define E3_MICROSTEPS    16
+    #define E3_RSENSE         0.11
+    #define E3_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(E4)
+    #define E4_CURRENT      800
+    #define E4_MICROSTEPS    16
+    #define E4_RSENSE         0.11
+    #define E4_CHAIN_POS     -1
+  #endif
+
+  #if AXIS_IS_TMC(E5)
+    #define E5_CURRENT      800
+    #define E5_MICROSTEPS    16
+    #define E5_RSENSE         0.11
+    #define E5_CHAIN_POS     -1
+  #endif
+
+  /**
+   * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here.
+   * The default pins can be found in your board's pins file.
+   */
+  //#define X_CS_PIN          -1
+  //#define Y_CS_PIN          -1
+  //#define Z_CS_PIN          -1
+  //#define X2_CS_PIN         -1
+  //#define Y2_CS_PIN         -1
+  //#define Z2_CS_PIN         -1
+  //#define Z3_CS_PIN         -1
+  //#define E0_CS_PIN         -1
+  //#define E1_CS_PIN         -1
+  //#define E2_CS_PIN         -1
+  //#define E3_CS_PIN         -1
+  //#define E4_CS_PIN         -1
+  //#define E5_CS_PIN         -1
+
+  /**
+   * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160).
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
+  /**
+   * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses.
+   * Set the address using jumpers on pins MS1 and MS2.
+   * Address | MS1  | MS2
+   *       0 | LOW  | LOW
+   *       1 | HIGH | LOW
+   *       2 | LOW  | HIGH
+   *       3 | HIGH | HIGH
+   *
+   * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers
+   * on the same serial port, either here or in your board's pins file.
+   */
+  #define  X_SLAVE_ADDRESS 0
+  #define  Y_SLAVE_ADDRESS 0
+  #define  Z_SLAVE_ADDRESS 0
+  #define X2_SLAVE_ADDRESS 0
+  #define Y2_SLAVE_ADDRESS 0
+  #define Z2_SLAVE_ADDRESS 0
+  #define Z3_SLAVE_ADDRESS 0
+  #define E0_SLAVE_ADDRESS 0
+  #define E1_SLAVE_ADDRESS 0
+  #define E2_SLAVE_ADDRESS 0
+  #define E3_SLAVE_ADDRESS 0
+  #define E4_SLAVE_ADDRESS 0
+  #define E5_SLAVE_ADDRESS 0
+
+  /**
+   * Software enable
+   *
+   * Use for drivers that do not use a dedicated enable pin, but rather handle the same
+   * function through a communication line such as SPI or UART.
+   */
+  //#define SOFTWARE_DRIVER_ENABLE
+
+  /**
+   * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
+   * Use Trinamic's ultra quiet stepping mode.
+   * When disabled, Marlin will use spreadCycle stepping mode.
+   */
+  #define STEALTHCHOP_XY
+  #define STEALTHCHOP_Z
+  #define STEALTHCHOP_E
+
+  /**
+   * Optimize spreadCycle chopper parameters by using predefined parameter sets
+   * or with the help of an example included in the library.
+   * Provided parameter sets are
+   * CHOPPER_DEFAULT_12V
+   * CHOPPER_DEFAULT_19V
+   * CHOPPER_DEFAULT_24V
+   * CHOPPER_DEFAULT_36V
+   * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+   * CHOPPER_MARLIN_119   // Old defaults from Marlin v1.1.9
+   *
+   * Define you own with
+   * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
+   */
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+
+  /**
+   * Monitor Trinamic drivers for error conditions,
+   * like overtemperature and short to ground.
+   * In the case of overtemperature Marlin can decrease the driver current until error condition clears.
+   * Other detected conditions can be used to stop the current print.
+   * Relevant g-codes:
+   * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
+   * M911 - Report stepper driver overtemperature pre-warn condition.
+   * M912 - Clear stepper driver overtemperature pre-warn condition flag.
+   * M122 - Report driver parameters (Requires TMC_DEBUG)
+   */
+  //#define MONITOR_DRIVER_STATUS
+
+  #if ENABLED(MONITOR_DRIVER_STATUS)
+    #define CURRENT_STEP_DOWN     50  // [mA]
+    #define REPORT_CURRENT_CHANGE
+    #define STOP_ON_ERROR
+  #endif
+
+  /**
+   * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only
+   * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
+   * This mode allows for faster movements at the expense of higher noise levels.
+   * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
+   * M913 X/Y/Z/E to live tune the setting
+   */
+  //#define HYBRID_THRESHOLD
+
+  #define X_HYBRID_THRESHOLD     100  // [mm/s]
+  #define X2_HYBRID_THRESHOLD    100
+  #define Y_HYBRID_THRESHOLD     100
+  #define Y2_HYBRID_THRESHOLD    100
+  #define Z_HYBRID_THRESHOLD       3
+  #define Z2_HYBRID_THRESHOLD      3
+  #define Z3_HYBRID_THRESHOLD      3
+  #define E0_HYBRID_THRESHOLD     30
+  #define E1_HYBRID_THRESHOLD     30
+  #define E2_HYBRID_THRESHOLD     30
+  #define E3_HYBRID_THRESHOLD     30
+  #define E4_HYBRID_THRESHOLD     30
+  #define E5_HYBRID_THRESHOLD     30
+
+  /**
+   * Use StallGuard2 to home / probe X, Y, Z.
+   *
+   * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only
+   * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
+   *
+   * X/Y/Z_STALL_SENSITIVITY is the default stall threshold.
+   * Use M914 X Y Z to set the stall threshold at runtime:
+   *
+   *  Sensitivity   TMC2209   Others
+   *    HIGHEST       255      -64    (Too sensitive => False positive)
+   *    LOWEST         0        63    (Too insensitive => No trigger)
+   *
+   * It is recommended to set [XYZ]_HOME_BUMP_MM to 0.
+   *
+   * SPI_ENDSTOPS  *** Beta feature! *** TMC2130 Only ***
+   * Poll the driver through SPI to determine load when homing.
+   * Removes the need for a wire from DIAG1 to an endstop pin.
+   *
+   * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
+   * homing and adds a guard period for endstop triggering.
+   */
+  //#define SENSORLESS_HOMING // StallGuard capable drivers only
+
+  /**
+   * Use StallGuard2 to probe the bed with the nozzle.
+   *
+   * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
+   *          to move the Z axis. Take extreme care when attempting to enable this feature.
+   */
+  //#define SENSORLESS_PROBING // StallGuard capable drivers only
+
+  #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
+    // TMC2209: 0...255. TMC2130: -64...63
+    #define X_STALL_SENSITIVITY  8
+    #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY
+    #define Y_STALL_SENSITIVITY  8
+    //#define Z_STALL_SENSITIVITY  8
+    //#define SPI_ENDSTOPS              // TMC2130 only
+    //#define IMPROVE_HOMING_RELIABILITY
+  #endif
+
+  /**
+   * Beta feature!
+   * Create a 50/50 square wave step pulse optimal for stepper drivers.
+   */
+  //#define SQUARE_WAVE_STEPPING
+
+  /**
+   * Enable M122 debugging command for TMC stepper drivers.
+   * M122 S0/1 will enable continous reporting.
+   */
+  //#define TMC_DEBUG
+
+  /**
+   * You can set your own advanced settings by filling in predefined functions.
+   * A list of available functions can be found on the library github page
+   * https://github.com/teemuatlut/TMCStepper
+   *
+   * Example:
+   * #define TMC_ADV() { \
+   *   stepperX.diag0_otpw(1); \
+   *   stepperY.intpol(0); \
+   * }
+   */
+  #define TMC_ADV() {  }
+
+#endif // HAS_TRINAMIC
+
+// @section L6470
+
+/**
+ * L6470 Stepper Driver options
+ *
+ * Arduino-L6470 library (0.7.0 or higher) is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
+ *
+ * Requires the following to be defined in your pins_YOUR_BOARD file
+ *     L6470_CHAIN_SCK_PIN
+ *     L6470_CHAIN_MISO_PIN
+ *     L6470_CHAIN_MOSI_PIN
+ *     L6470_CHAIN_SS_PIN
+ *     L6470_RESET_CHAIN_PIN  (optional)
+ */
+#if HAS_DRIVER(L6470)
+
+  //#define L6470_CHITCHAT        // Display additional status info
+
+  #if AXIS_DRIVER_TYPE_X(L6470)
+    #define X_MICROSTEPS     128  // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128)
+    #define X_OVERCURRENT   2000  // (mA) Current where the driver detects an over current (VALID: 375 x (1 - 16) - 6A max - rounds down)
+    #define X_STALLCURRENT  1500  // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) -  4A max - rounds down)
+    #define X_MAX_VOLTAGE    127  // 0-255, Maximum effective voltage seen by stepper
+    #define X_CHAIN_POS       -1  // Position in SPI chain. (<=0 : Not in chain. 1 : Nearest MOSI)
+  #endif
+
+  #if AXIS_DRIVER_TYPE_X2(L6470)
+    #define X2_MICROSTEPS      128
+    #define X2_OVERCURRENT    2000
+    #define X2_STALLCURRENT   1500
+    #define X2_MAX_VOLTAGE     127
+    #define X2_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Y(L6470)
+    #define Y_MICROSTEPS       128
+    #define Y_OVERCURRENT     2000
+    #define Y_STALLCURRENT    1500
+    #define Y_MAX_VOLTAGE      127
+    #define Y_CHAIN_POS         -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Y2(L6470)
+    #define Y2_MICROSTEPS      128
+    #define Y2_OVERCURRENT    2000
+    #define Y2_STALLCURRENT   1500
+    #define Y2_MAX_VOLTAGE     127
+    #define Y2_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Z(L6470)
+    #define Z_MICROSTEPS       128
+    #define Z_OVERCURRENT     2000
+    #define Z_STALLCURRENT    1500
+    #define Z_MAX_VOLTAGE      127
+    #define Z_CHAIN_POS         -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Z2(L6470)
+    #define Z2_MICROSTEPS      128
+    #define Z2_OVERCURRENT    2000
+    #define Z2_STALLCURRENT   1500
+    #define Z2_MAX_VOLTAGE     127
+    #define Z2_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_Z3(L6470)
+    #define Z3_MICROSTEPS      128
+    #define Z3_OVERCURRENT    2000
+    #define Z3_STALLCURRENT   1500
+    #define Z3_MAX_VOLTAGE     127
+    #define Z3_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E0(L6470)
+    #define E0_MICROSTEPS      128
+    #define E0_OVERCURRENT    2000
+    #define E0_STALLCURRENT   1500
+    #define E0_MAX_VOLTAGE     127
+    #define E0_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E1(L6470)
+    #define E1_MICROSTEPS      128
+    #define E1_OVERCURRENT    2000
+    #define E1_STALLCURRENT   1500
+    #define E1_MAX_VOLTAGE     127
+    #define E1_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E2(L6470)
+    #define E2_MICROSTEPS      128
+    #define E2_OVERCURRENT    2000
+    #define E2_STALLCURRENT   1500
+    #define E2_MAX_VOLTAGE     127
+    #define E2_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E3(L6470)
+    #define E3_MICROSTEPS      128
+    #define E3_OVERCURRENT    2000
+    #define E3_STALLCURRENT   1500
+    #define E3_MAX_VOLTAGE     127
+    #define E3_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E4(L6470)
+    #define E4_MICROSTEPS      128
+    #define E4_OVERCURRENT    2000
+    #define E4_STALLCURRENT   1500
+    #define E4_MAX_VOLTAGE     127
+    #define E4_CHAIN_POS        -1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_E5(L6470)
+    #define E5_MICROSTEPS      128
+    #define E5_OVERCURRENT    2000
+    #define E5_STALLCURRENT   1500
+    #define E5_MAX_VOLTAGE     127
+    #define E5_CHAIN_POS        -1
+  #endif
+
+  /**
+   * Monitor L6470 drivers for error conditions like over temperature and over current.
+   * In the case of over temperature Marlin can decrease the drive until the error condition clears.
+   * Other detected conditions can be used to stop the current print.
+   * Relevant g-codes:
+   * M906 - I1/2/3/4/5  Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given.
+   *         I not present or I0 or I1 - X, Y, Z or E0
+   *         I2 - X2, Y2, Z2 or E1
+   *         I3 - Z3 or E3
+   *         I4 - E4
+   *         I5 - E5
+   * M916 - Increase drive level until get thermal warning
+   * M917 - Find minimum current thresholds
+   * M918 - Increase speed until max or error
+   * M122 S0/1 - Report driver parameters
+   */
+  //#define MONITOR_L6470_DRIVER_STATUS
+
+  #if ENABLED(MONITOR_L6470_DRIVER_STATUS)
+    #define KVAL_HOLD_STEP_DOWN     1
+    //#define L6470_STOP_ON_ERROR
+  #endif
+
+#endif // L6470
+
+/**
+ * TWI/I2C BUS
+ *
+ * This feature is an EXPERIMENTAL feature so it shall not be used on production
+ * machines. Enabling this will allow you to send and receive I2C data from slave
+ * devices on the bus.
+ *
+ * ; Example #1
+ * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
+ * ; It uses multiple M260 commands with one B<base 10> arg
+ * M260 A99  ; Target slave address
+ * M260 B77  ; M
+ * M260 B97  ; a
+ * M260 B114 ; r
+ * M260 B108 ; l
+ * M260 B105 ; i
+ * M260 B110 ; n
+ * M260 S1   ; Send the current buffer
+ *
+ * ; Example #2
+ * ; Request 6 bytes from slave device with address 0x63 (99)
+ * M261 A99 B5
+ *
+ * ; Example #3
+ * ; Example serial output of a M261 request
+ * echo:i2c-reply: from:99 bytes:5 data:hello
+ */
+
+// @section i2cbus
+
+//#define EXPERIMENTAL_I2CBUS
+#define I2C_SLAVE_ADDRESS  0 // Set a value from 8 to 127 to act as a slave
+
+// @section extras
+
+/**
+ * Photo G-code
+ * Add the M240 G-code to take a photo.
+ * The photo can be triggered by a digital pin or a physical movement.
+ */
+//#define PHOTO_GCODE
+#if ENABLED(PHOTO_GCODE)
+  // A position to move to (and raise Z) before taking the photo
+  //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 }  // { xpos, ypos, zraise } (M240 X Y Z)
+  //#define PHOTO_DELAY_MS   100                            // (ms) Duration to pause before moving back (M240 P)
+  //#define PHOTO_RETRACT_MM   6.5                          // (mm) E retract/recover for the photo move (M240 R S)
+
+  // Canon RC-1 or homebrew digital camera trigger
+  // Data from: http://www.doc-diy.net/photo/rc-1_hacked/
+  //#define PHOTOGRAPH_PIN 23
+
+  // Canon Hack Development Kit
+  // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+  //#define CHDK_PIN        4
+
+  // Optional second move with delay to trigger the camera shutter
+  //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS }  // { xpos, ypos } (M240 I J)
+
+  // Duration to hold the switch or keep CHDK_PIN high
+  //#define PHOTO_SWITCH_MS   50 // (ms) (M240 D)
+#endif
+
+/**
+ * Spindle & Laser control
+ *
+ * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
+ * to set spindle speed, spindle direction, and laser power.
+ *
+ * SuperPid is a router/spindle speed controller used in the CNC milling community.
+ * Marlin can be used to turn the spindle on and off. It can also be used to set
+ * the spindle speed from 5,000 to 30,000 RPM.
+ *
+ * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
+ * hardware PWM pin for the speed control and a pin for the rotation direction.
+ *
+ * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
+ */
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
+#if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
+  #define SPINDLE_LASER_ACTIVE_HIGH     false  // Set to "true" if the on/off function is active HIGH
+  #define SPINDLE_LASER_PWM             true   // Set to "true" if your controller supports setting the speed/power
+  #define SPINDLE_LASER_PWM_INVERT      true   // Set to "true" if the speed/power goes up when you want it to go slower
+  #define SPINDLE_LASER_POWERUP_DELAY   5000   // (ms) Delay to allow the spindle/laser to come up to speed/power
+  #define SPINDLE_LASER_POWERDOWN_DELAY 5000   // (ms) Delay to allow the spindle to stop
+
+  #if ENABLED(SPINDLE_FEATURE)
+    //#define SPINDLE_CHANGE_DIR               // Enable if your spindle controller can change spindle direction
+    #define SPINDLE_CHANGE_DIR_STOP            // Enable if the spindle should stop before changing spin direction
+    #define SPINDLE_INVERT_DIR          false  // Set to "true" if the spin direction is reversed
+
+    /**
+     *  The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+     *
+     *  SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+     *    where PWM duty cycle varies from 0 to 255
+     *
+     *  set the following for your controller (ALL MUST BE SET)
+     */
+    #define SPEED_POWER_SLOPE    118.4
+    #define SPEED_POWER_INTERCEPT  0
+    #define SPEED_POWER_MIN     5000
+    #define SPEED_POWER_MAX    30000    // SuperPID router controller 0 - 30,000 RPM
+  #else
+    #define SPEED_POWER_SLOPE      0.3922
+    #define SPEED_POWER_INTERCEPT  0
+    #define SPEED_POWER_MIN       10
+    #define SPEED_POWER_MAX      100    // 0-100%
+  #endif
+#endif
+
+/**
+ * Coolant Control
+ *
+ * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off.
+ *
+ * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined.
+ */
+//#define COOLANT_CONTROL
+#if ENABLED(COOLANT_CONTROL)
+  #define COOLANT_MIST                // Enable if mist coolant is present
+  #define COOLANT_FLOOD               // Enable if flood coolant is present
+  #define COOLANT_MIST_INVERT  false  // Set "true" if the on/off function is reversed
+  #define COOLANT_FLOOD_INVERT false  // Set "true" if the on/off function is reversed
+#endif
+
+/**
+ * Filament Width Sensor
+ *
+ * Measures the filament width in real-time and adjusts
+ * flow rate to compensate for any irregularities.
+ *
+ * Also allows the measured filament diameter to set the
+ * extrusion rate, so the slicer only has to specify the
+ * volume.
+ *
+ * Only a single extruder is supported at this time.
+ *
+ *  34 RAMPS_14    : Analog input 5 on the AUX2 connector
+ *  81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
+ * 301 RAMBO       : Analog input 3
+ *
+ * Note: May require analog pins to be defined for other boards.
+ */
+//#define FILAMENT_WIDTH_SENSOR
+
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+  #define FILAMENT_SENSOR_EXTRUDER_NUM 0    // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
+  #define MEASUREMENT_DELAY_CM        14    // (cm) The distance from the filament sensor to the melting chamber
+
+  #define FILWIDTH_ERROR_MARGIN        1.0  // (mm) If a measurement differs too much from nominal width ignore it
+  #define MAX_MEASUREMENT_DELAY       20    // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
+
+  #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
+
+  // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
+  //#define FILAMENT_LCD_DISPLAY
+#endif
+
+/**
+ * CNC Coordinate Systems
+ *
+ * Enables G53 and G54-G59.3 commands to select coordinate systems
+ * and G92.1 to reset the workspace to native machine space.
+ */
+//#define CNC_COORDINATE_SYSTEMS
+
+/**
+ * Auto-report temperatures with M155 S<seconds>
+ */
+#define AUTO_REPORT_TEMPERATURES
+
+/**
+ * Include capabilities in M115 output
+ */
+#define EXTENDED_CAPABILITIES_REPORT
+
+/**
+ * Expected Printer Check
+ * Add the M16 G-code to compare a string to the MACHINE_NAME.
+ * M16 with a non-matching string causes the printer to halt.
+ */
+//#define EXPECTED_PRINTER_CHECK
+
+/**
+ * Disable all Volumetric extrusion options
+ */
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
+
+/**
+ * Enable this option for a leaner build of Marlin that removes all
+ * workspace offsets, simplifying coordinate transformations, leveling, etc.
+ *
+ *  - M206 and M428 are disabled.
+ *  - G92 will revert to its behavior from Marlin 1.0.
+ */
+//#define NO_WORKSPACE_OFFSETS
+
+/**
+ * Set the number of proportional font spaces required to fill up a typical character space.
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
+ *
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
+ * Otherwise, adjust according to your client and font.
+ */
+#define PROPORTIONAL_FONT_RATIO 1.0
+
+/**
+ * Spend 28 bytes of SRAM to optimize the GCode parser
+ */
+#define FASTER_GCODE_PARSER
+
+/**
+ * CNC G-code options
+ * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
+ */
+//#define PAREN_COMMENTS      // Support for parentheses-delimited comments
+//#define GCODE_MOTION_MODES  // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+
+// Enable and set a (default) feedrate for all G0 moves
+//#define G0_FEEDRATE 3000 // (mm/m)
+#ifdef G0_FEEDRATE
+  //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
+#endif
+
+/**
+ * Startup commands
+ *
+ * Execute certain G-code commands immediately after power-on.
+ */
+//#define STARTUP_COMMANDS "M17 Z"
+
+/**
+ * G-code Macros
+ *
+ * Add G-codes M810-M819 to define and run G-code macros.
+ * Macros are not saved to EEPROM.
+ */
+//#define GCODE_MACROS
+#if ENABLED(GCODE_MACROS)
+  #define GCODE_MACROS_SLOTS       5  // Up to 10 may be used
+  #define GCODE_MACROS_SLOT_SIZE  50  // Maximum length of a single macro
+#endif
+
+/**
+ * User-defined menu items that execute custom GCode
+ */
+//#define CUSTOM_USER_MENUS
+#if ENABLED(CUSTOM_USER_MENUS)
+  //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
+  #define USER_SCRIPT_DONE "M117 User Script Done"
+  #define USER_SCRIPT_AUDIBLE_FEEDBACK
+  //#define USER_SCRIPT_RETURN  // Return to status screen after a script
+
+  #define USER_DESC_1 "Home & UBL Info"
+  #define USER_GCODE_1 "G28\nG29 W"
+
+  #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
+  #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+
+  #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
+  #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+
+  #define USER_DESC_4 "Heat Bed/Home/Level"
+  #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
+
+  #define USER_DESC_5 "Home & Info"
+  #define USER_GCODE_5 "G28\nM503"
+#endif
+
+/**
+ * Host Action Commands
+ *
+ * Define host streamer action commands in compliance with the standard.
+ *
+ * See https://reprap.org/wiki/G-code#Action_commands
+ * Common commands ........ poweroff, pause, paused, resume, resumed, cancel
+ * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed
+ *
+ * Some features add reason codes to extend these commands.
+ *
+ * Host Prompt Support enables Marlin to use the host for user prompts so
+ * filament runout and other processes can be managed from the host side.
+ */
+//#define HOST_ACTION_COMMANDS
+#if ENABLED(HOST_ACTION_COMMANDS)
+  //#define HOST_PROMPT_SUPPORT
+#endif
+
+/**
+ * Cancel Objects
+ *
+ * Implement M486 to allow Marlin to skip objects
+ */
+//#define CANCEL_OBJECTS
+
+/**
+ * I2C position encoders for closed loop control.
+ * Developed by Chris Barr at Aus3D.
+ *
+ * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
+ * Github: https://github.com/Aus3D/MagneticEncoder
+ *
+ * Supplier: http://aus3d.com.au/magnetic-encoder-module
+ * Alternative Supplier: http://reliabuild3d.com/
+ *
+ * Reliabuild encoders have been modified to improve reliability.
+ */
+
+//#define I2C_POSITION_ENCODERS
+#if ENABLED(I2C_POSITION_ENCODERS)
+
+  #define I2CPE_ENCODER_CNT         1                       // The number of encoders installed; max of 5
+                                                            // encoders supported currently.
+
+  #define I2CPE_ENC_1_ADDR          I2CPE_PRESET_ADDR_X     // I2C address of the encoder. 30-200.
+  #define I2CPE_ENC_1_AXIS          X_AXIS                  // Axis the encoder module is installed on.  <X|Y|Z|E>_AXIS.
+  #define I2CPE_ENC_1_TYPE          I2CPE_ENC_TYPE_LINEAR   // Type of encoder:  I2CPE_ENC_TYPE_LINEAR -or-
+                                                            // I2CPE_ENC_TYPE_ROTARY.
+  #define I2CPE_ENC_1_TICKS_UNIT    2048                    // 1024 for magnetic strips with 2mm poles; 2048 for
+                                                            // 1mm poles. For linear encoders this is ticks / mm,
+                                                            // for rotary encoders this is ticks / revolution.
+  //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
+                                                            // steps per full revolution (motor steps/rev * microstepping)
+  //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
+  #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
+                                                            // printer will attempt to correct the error; errors
+                                                            // smaller than this are ignored to minimize effects of
+                                                            // measurement noise / latency (filter).
+
+  #define I2CPE_ENC_2_ADDR          I2CPE_PRESET_ADDR_Y     // Same as above, but for encoder 2.
+  #define I2CPE_ENC_2_AXIS          Y_AXIS
+  #define I2CPE_ENC_2_TYPE          I2CPE_ENC_TYPE_LINEAR
+  #define I2CPE_ENC_2_TICKS_UNIT    2048
+  //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
+  //#define I2CPE_ENC_2_INVERT
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
+  #define I2CPE_ENC_2_EC_THRESH     0.10
+
+  #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
+  #define I2CPE_ENC_3_AXIS          Z_AXIS                  // as above, or use defaults below.
+
+  #define I2CPE_ENC_4_ADDR          I2CPE_PRESET_ADDR_E     // Encoder 4.
+  #define I2CPE_ENC_4_AXIS          E_AXIS
+
+  #define I2CPE_ENC_5_ADDR          34                      // Encoder 5.
+  #define I2CPE_ENC_5_AXIS          E_AXIS
+
+  // Default settings for encoders which are enabled, but without settings configured above.
+  #define I2CPE_DEF_TYPE            I2CPE_ENC_TYPE_LINEAR
+  #define I2CPE_DEF_ENC_TICKS_UNIT  2048
+  #define I2CPE_DEF_TICKS_REV       (16 * 200)
+  #define I2CPE_DEF_EC_METHOD       I2CPE_ECM_NONE
+  #define I2CPE_DEF_EC_THRESH       0.1
+
+  //#define I2CPE_ERR_THRESH_ABORT  100.0                   // Threshold size for error (in mm) error on any given
+                                                            // axis after which the printer will abort. Comment out to
+                                                            // disable abort behavior.
+
+  #define I2CPE_TIME_TRUSTED        10000                   // After an encoder fault, there must be no further fault
+                                                            // for this amount of time (in ms) before the encoder
+                                                            // is trusted again.
+
+  /**
+   * Position is checked every time a new command is executed from the buffer but during long moves,
+   * this setting determines the minimum update time between checks. A value of 100 works well with
+   * error rolling average when attempting to correct only for skips and not for vibration.
+   */
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
+
+  // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
+  #define I2CPE_ERR_ROLLING_AVERAGE
+
+#endif // I2C_POSITION_ENCODERS
+
+/**
+ * Analog Joystick(s)
+ */
+//#define JOYSTICK
+#if ENABLED(JOYSTICK)
+  #define JOY_X_PIN    5  // RAMPS: Suggested pin A5  on AUX2
+  #define JOY_Y_PIN   10  // RAMPS: Suggested pin A10 on AUX2
+  #define JOY_Z_PIN   12  // RAMPS: Suggested pin A12 on AUX2
+  #define JOY_EN_PIN  44  // RAMPS: Suggested pin D44 on AUX2
+
+  // Use M119 to find reasonable values after connecting your hardware:
+  #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
+  #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
+  #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
+#endif
+
+/**
+ * MAX7219 Debug Matrix
+ *
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
+ */
+//#define MAX7219_DEBUG
+#if ENABLED(MAX7219_DEBUG)
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
+
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
+  //#define MAX7219_REVERSE_ORDER  // The individual LED matrix units may be in reversed order
+  //#define MAX7219_SIDE_BY_SIDE   // Big chip+matrix boards can be chained side-by-side
+
+  /**
+   * Sample debug features
+   * If you add more debug displays, be careful to avoid conflicts!
+   */
+  #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
+
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
+                                         // If you experience stuttering, reboots, etc. this option can reveal how
+                                         // tweaks made to the configuration are affecting the printer in real-time.
+#endif
+
+/**
+ * NanoDLP Sync support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ */
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behavior is limited to Z axis only.
+#endif
+
+/**
+ * WiFi Support (Espressif ESP32 WiFi)
+ */
+//#define WIFISUPPORT
+#if ENABLED(WIFISUPPORT)
+  #define WIFI_SSID "Wifi SSID"
+  #define WIFI_PWD  "Wifi Password"
+  //#define WEBSUPPORT        // Start a webserver with auto-discovery
+  //#define OTASUPPORT        // Support over-the-air firmware updates
+#endif
+
+/**
+ * Prusa Multi-Material Unit v2
+ * Enable in Configuration.h
+ */
+#if ENABLED(PRUSA_MMU2)
+
+  // Serial port used for communication with MMU2.
+  // For AVR enable the UART port used for the MMU. (e.g., internalSerial)
+  // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2)
+  #define INTERNAL_SERIAL_PORT 2
+  #define MMU2_SERIAL internalSerial
+
+  // Use hardware reset for MMU if a pin is defined for it
+  //#define MMU2_RST_PIN 23
+
+  // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
+  //#define MMU2_MODE_12V
+
+  // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
+  #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
+
+  // Add an LCD menu for MMU2
+  //#define MMU2_MENUS
+  #if ENABLED(MMU2_MENUS)
+    // Settings for filament load / unload from the LCD menu.
+    // This is for Prusa MK3-style extruders. Customize for your hardware.
+    #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
+    #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
+      {  7.2,  562 }, \
+      { 14.4,  871 }, \
+      { 36.0, 1393 }, \
+      { 14.4,  871 }, \
+      { 50.0,  198 }
+
+    #define MMU2_RAMMING_SEQUENCE \
+      {   1.0, 1000 }, \
+      {   1.0, 1500 }, \
+      {   2.0, 2000 }, \
+      {   1.5, 3000 }, \
+      {   2.5, 4000 }, \
+      { -15.0, 5000 }, \
+      { -14.0, 1200 }, \
+      {  -6.0,  600 }, \
+      {  10.0,  700 }, \
+      { -10.0,  400 }, \
+      { -50.0, 2000 }
+
+  #endif
+
+  //#define MMU2_DEBUG  // Write debug info to serial output
+
+#endif // PRUSA_MMU2
+
+/**
+ * Advanced Print Counter settings
+ */
+#if ENABLED(PRINTCOUNTER)
+  #define SERVICE_WARNING_BUZZES  3
+  // Activate up to 3 service interval watchdogs
+  //#define SERVICE_NAME_1      "Service S"
+  //#define SERVICE_INTERVAL_1  100 // print hours
+  //#define SERVICE_NAME_2      "Service L"
+  //#define SERVICE_INTERVAL_2  200 // print hours
+  //#define SERVICE_NAME_3      "Service 3"
+  //#define SERVICE_INTERVAL_3    1 // print hours
+#endif
+
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
author	Eddie Ehlin <eddiex@eddiex.se>	2020-01-23 18:34:59 +0100
committer	Eddie Ehlin <eddiex@eddiex.se>	2020-01-23 18:34:59 +0100
commit	216d179bdbf9713c69acd49d5b39c370b0745e6a (patch)
tree	cf4bd4960514b98eb03b465a908bb75ce1fab12d /marlinfw/config/Configuration_adv.h
download	3DPrinter-CR10S-216d179bdbf9713c69acd49d5b39c370b0745e6a.tar.gz 3DPrinter-CR10S-216d179bdbf9713c69acd49d5b39c370b0745e6a.zip