aboutsummaryrefslogtreecommitdiffstats
path: root/marlinfw-skr-e3-mini-v2
diff options
context:
space:
mode:
Diffstat (limited to 'marlinfw-skr-e3-mini-v2')
-rw-r--r--marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff52
-rw-r--r--marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff22
2 files changed, 74 insertions, 0 deletions
diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff
new file mode 100644
index 0000000..c856f09
--- /dev/null
+++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration.h.diff
@@ -0,0 +1,52 @@
+diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h
+index 96a82a9..44c9f11 100644
+--- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h
++++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration.h
+@@ -1033,7 +1033,7 @@
+ * The probe replaces the Z-MIN endstop and is used for Z homing.
+ * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
+ */
+-//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
++#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+
+ // Force the use of the probe for Z-axis homing
+ //#define USE_PROBE_FOR_Z_HOMING
+@@ -1067,7 +1067,7 @@
+ * Use G29 repeatedly, adjusting the Z height at each point with movement commands
+ * or (with LCD_BED_LEVELING) the LCD controller.
+ */
+-#define PROBE_MANUALLY
++//#define PROBE_MANUALLY
+
+ /**
+ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
+@@ -1182,8 +1182,7 @@
+ * | [-] |
+ * O-- FRONT --+
+ */
+-//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } Only of interest with BLTouch
+-#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 }
++#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+
+ // Most probes should stay away from the edges of the bed, but
+ // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
+@@ -1558,7 +1557,7 @@
+ * these options to restore the prior leveling state or to always enable
+ * leveling immediately after G28.
+ */
+-#define RESTORE_LEVELING_AFTER_G28
++//#define RESTORE_LEVELING_AFTER_G28
+ //#define ENABLE_LEVELING_AFTER_G28
+
+ /**
+@@ -1668,8 +1667,8 @@
+ //=================================== Mesh ==================================
+ //===========================================================================
+
+- #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed
+- #define GRID_MAX_POINTS_X 4 // Don't use more than 7 points per axis, implementation limited.
++ #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
++ #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff
new file mode 100644
index 0000000..6f444c9
--- /dev/null
+++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/manual-probe-with-mesh-leveling/Configuration_adv.h.diff
@@ -0,0 +1,22 @@
+diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h
+index 09db032..172088a 100644
+--- a/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h
++++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.3/Configuration_adv.h
+@@ -508,7 +508,7 @@
+ * The fan turns on automatically whenever any driver is enabled and turns
+ * off (or reduces to idle speed) shortly after drivers are turned off.
+ */
+-//#define USE_CONTROLLER_FAN Disabled since we are using FAN1 pin for extruder fan.
++#define USE_CONTROLLER_FAN
+ #if ENABLED(USE_CONTROLLER_FAN)
+ //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
+ //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered
+@@ -607,7 +607,7 @@
+ * Multiple extruders can be assigned to the same pin in which case
+ * the fan will turn on when any selected extruder is above the threshold.
+ */
+-#define E0_AUTO_FAN_PIN FAN1_PIN //Extruder fan on FAN1 pin
++#define E0_AUTO_FAN_PIN -1
+ #define E1_AUTO_FAN_PIN -1
+ #define E2_AUTO_FAN_PIN -1
+ #define E3_AUTO_FAN_PIN -1