aboutsummaryrefslogtreecommitdiffstats
path: root/marlinfw-skr-e3-mini-v2
diff options
context:
space:
mode:
authorEddie Ehlin <eddiex@eddiex.se>2021-10-08 13:06:54 +0200
committerEddie Ehlin <eddiex@eddiex.se>2021-10-08 13:06:54 +0200
commitd8c76e7ef7089cfc73c49b3548c2af2b98949c85 (patch)
treee9eecb716e0b9aab242edecd9ce105f9cfb6ef3a /marlinfw-skr-e3-mini-v2
parent6c37d9816b697322d9c2d031ec5109036fb3e70a (diff)
download3DPrinter-CR10S-d8c76e7ef7089cfc73c49b3548c2af2b98949c85.tar.gz
3DPrinter-CR10S-d8c76e7ef7089cfc73c49b3548c2af2b98949c85.zip
Added BLTouch configuration to example BTT configuration.
Diffstat (limited to 'marlinfw-skr-e3-mini-v2')
-rw-r--r--marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration.h16
-rw-r--r--marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration_adv.h12
2 files changed, 14 insertions, 14 deletions
diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration.h
index 4bdc3da..2d06579 100644
--- a/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration.h
+++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration.h
@@ -1090,7 +1090,7 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
-//#define BLTOUCH
+#define BLTOUCH
/**
* Touch-MI Probe by hotends.fr
@@ -1182,11 +1182,11 @@
* | [-] |
* O-- FRONT --+
*/
-#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { -43, -10, 0 } // Z-offset usally -2.58
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#define PROBING_MARGIN 10
+#define PROBING_MARGIN 40
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (133*60)
@@ -1233,7 +1233,7 @@
* A total of 2 does fast/slow probes with a weighted average.
* A total of 3 or more adds more slow probes, taking the average.
*/
-//#define MULTIPLE_PROBING 2
+#define MULTIPLE_PROBING 2
//#define EXTRA_PROBING 1
/**
@@ -1539,9 +1539,9 @@
*/
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
-//#define AUTO_BED_LEVELING_BILINEAR
+#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
-#define MESH_BED_LEVELING
+//#define MESH_BED_LEVELING
/**
* Normally G28 leaves leveling disabled on completion. Enable one of
@@ -1606,7 +1606,7 @@
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension.
- #define GRID_MAX_POINTS_X 5
+ #define GRID_MAX_POINTS_X 9
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
// Probe along the Y axis, advancing X after each column
@@ -1740,7 +1740,7 @@
* - Allows Z homing only when XY positions are known and trusted.
* - If stepper drivers sleep, XY homing may be required again before Z homing.
*/
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing
diff --git a/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration_adv.h b/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration_adv.h
index 4c9224c..5227362 100644
--- a/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration_adv.h
+++ b/marlinfw-skr-e3-mini-v2/config-2.0.9.2/Configuration_adv.h
@@ -818,7 +818,7 @@
// Safety: The probe needs time to recognize the command.
// Minimum command delay (ms). Enable and increase if needed.
- //#define BLTOUCH_DELAY 500
+ #define BLTOUCH_DELAY 500
/**
* Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones:
@@ -826,7 +826,7 @@
// Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful
// in special cases, like noisy or filtered input configurations.
- //#define BLTOUCH_FORCE_SW_MODE
+ #define BLTOUCH_FORCE_SW_MODE
/**
* Settings for BLTouch Smart 3.0 and 3.1
@@ -1225,14 +1225,14 @@
// Add Probe Z Offset calibration to the Z Probe Offsets menu
#if HAS_BED_PROBE
- //#define PROBE_OFFSET_WIZARD
+ #define PROBE_OFFSET_WIZARD
#if ENABLED(PROBE_OFFSET_WIZARD)
//
// Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4.
//
- //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+ #define PROBE_OFFSET_WIZARD_START_Z -2.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
@@ -1883,9 +1883,9 @@
#endif
#endif
- //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
+ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
- //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
+ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor