aboutsummaryrefslogtreecommitdiffstats
path: root/marlinfw
diff options
context:
space:
mode:
authorEddie Ehlin <eddiex@eddiex.se>2020-02-16 12:11:38 +0100
committerEddie Ehlin <eddiex@eddiex.se>2020-02-16 12:11:38 +0100
commit577cd2b8e2c4b4a63f8fefc1a9f3d47bdfed474e (patch)
tree302a18697f87df47b58e65147ad1e2adab3a840a /marlinfw
parent278f8899a3411c143cdbb557ac24342cacd22266 (diff)
download3DPrinter-CR10S-577cd2b8e2c4b4a63f8fefc1a9f3d47bdfed474e.tar.gz
3DPrinter-CR10S-577cd2b8e2c4b4a63f8fefc1a9f3d47bdfed474e.zip
Altered configuration to support BL Touch (based on 2.0.x config used)).
Diffstat (limited to 'marlinfw')
-rw-r--r--marlinfw/config-1.1.x/Configuration.h10
-rw-r--r--marlinfw/config-1.1.x/Configuration_adv.h4
2 files changed, 7 insertions, 7 deletions
diff --git a/marlinfw/config-1.1.x/Configuration.h b/marlinfw/config-1.1.x/Configuration.h
index 37b4c2a..b85a5a0 100644
--- a/marlinfw/config-1.1.x/Configuration.h
+++ b/marlinfw/config-1.1.x/Configuration.h
@@ -713,7 +713,7 @@
* Use G29 repeatedly, adjusting the Z height at each point with movement commands
* or (with LCD_BED_LEVELING) the LCD controller.
*/
-#define PROBE_MANUALLY
+//#define PROBE_MANUALLY
//#define MANUAL_PROBE_START_Z 0.2
/**
@@ -731,7 +731,7 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
-//#define BLTOUCH
+#define BLTOUCH
/**
* Enable one or more of the following if probing seems unreliable.
@@ -777,8 +777,8 @@
* O-- FRONT --+
* (0,0)
*/
-#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
-#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
+#define X_PROBE_OFFSET_FROM_EXTRUDER -45 // X offset: -left +right [of the nozzle]
+#define Y_PROBE_OFFSET_FROM_EXTRUDER -9 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
// Certain types of probes need to stay away from edges
@@ -1144,7 +1144,7 @@
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
// - Prevent Z homing when the Z probe is outside bed area.
//
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
diff --git a/marlinfw/config-1.1.x/Configuration_adv.h b/marlinfw/config-1.1.x/Configuration_adv.h
index 9ae8a59..67dc5e7 100644
--- a/marlinfw/config-1.1.x/Configuration_adv.h
+++ b/marlinfw/config-1.1.x/Configuration_adv.h
@@ -808,11 +808,11 @@
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion.
- //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
+ #define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
- //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
+ #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
#endif
// @section extruder